How your supposed todo your PCV system
Thread Starter
TECH Addict
iTrader: (37)
Joined: Feb 2006
Posts: 2,714
Likes: 1
From: Tomball (H-Town), TX
How your supposed todo your PCV system Well i'm sick of all these threads, this is how you do it, no breathers blah blah unless you have crank case air problems (then u got other problems)
anyways for your valve cover get a purolator breather filter.. flows both ways and has a screen to stop oil fumes... http://www.partsamerica.com/ProductD...tnumber=B23165
for your PCV on the side of your manifold going to your throttle body get a husky or another inline compressor catch can (used to catch water for compressors) and some 3/8 fittings then put that somewhere inthe line between your manifold and TB
that's all I have to say lol thats how GM did it but improved on it.. so oil WONT get back into your intake I don't take all/any credit i got this from a few threads
anyways for your valve cover get a purolator breather filter.. flows both ways and has a screen to stop oil fumes... http://www.partsamerica.com/ProductD...tnumber=B23165
for your PCV on the side of your manifold going to your throttle body get a husky or another inline compressor catch can (used to catch water for compressors) and some 3/8 fittings then put that somewhere inthe line between your manifold and TB
that's all I have to say lol thats how GM did it but improved on it.. so oil WONT get back into your intake I don't take all/any credit i got this from a few threads
Thread Starter
TECH Addict
iTrader: (37)
Joined: Feb 2006
Posts: 2,714
Likes: 1
From: Tomball (H-Town), TX
Originally Posted by LiENUS
The purolator hooks up to the stock position right? valvecover to tb? if so me likey this idea very much and will most likely be doing this conversion shortly
TECH Apprentice
Joined: Mar 2006
Posts: 326
Likes: 0
Originally Posted by Gun5
correct sorry for not stating that in the original post
TECH Fanatic
Joined: Jan 2005
Posts: 1,162
Likes: 0
From: St. Augustine, FL
^^ it goes in the pass side valve cover and runs to the TB!
Would that thing fit on the vette valve covers? The hole is on the side of the cover facing the intake manifold on those. Not much room for that big round part.
Would that thing fit on the vette valve covers? The hole is on the side of the cover facing the intake manifold on those. Not much room for that big round part.
https://ls1tech.com/forums/lt1-lt4-modifications/651760-pics-my-catch-can-setup-you-guys-wondering-how-do.html
And I cut the bottom part that sticks down on the purolator filter so it can actually get some flow since the side entrances were blocked by the gromet.
And I cut the bottom part that sticks down on the purolator filter so it can actually get some flow since the side entrances were blocked by the gromet.
TECH Regular
Joined: Aug 2005
Posts: 430
Likes: 0
Originally Posted by hyperzone
^^ it goes in the pass side valve cover and runs to the TB!
Would that thing fit on the vette valve covers? The hole is on the side of the cover facing the intake manifold on those. Not much room for that big round part.
Would that thing fit on the vette valve covers? The hole is on the side of the cover facing the intake manifold on those. Not much room for that big round part.
