so i am building a new motor and i am going to run a wet 125 shot on it. I was wondering if i need to put a cam in the motor that is for nitrous or could i use any ole cam and be ok.

 

Go custom cam!

 

A custom grind is never a bad idea, but I wouldn't get a nitrous specific grind for a 125 shot.

 

x3!!! a custom grind would be better for overall driveability IMO, but since your not spraying too much concentrate on an N/A cam. I was told not to worry about nitrous cams unless you plan to spray over 200. But if you insist or find a good deal on off-the shelf cams do a quick search and you will find alot of info for your common LT1 cam questions.

 

wheres a good place for custom cams

 

cc306