Tool used to remove plug for coolant temp sensor...
Thread Starter
Joined: Jan 2007
Posts: 11,941
Likes: 33
From: Conroe, Texas
Tool used to remove plug for coolant temp sensor... I installed the heads tonight, just got done with the torque specs, they are off of a 93 vette so i need to remove the plug for the coolant sensor due to the different side for function, tried grinding a 3/8 extension to no avail, what i need to do???? Going to bed now it is 3:31 here, thans for any help guys. 
Thread Starter
Joined: Jan 2007
Posts: 11,941
Likes: 33
From: Conroe, Texas
OK, nobody ever ran into this problem i guess, i found the answer if anyone ever runs into this problem, i used some heat and i used a tap with the square end that was a little smaller than a 3/8's socker wrench, came right out, i was scared i was gonna have trouble but it came out, the extension i grinded down just twisted.
Any machine shop should have what you need and can tell you the best place to buy one. We have a local tool shop called Clark's tool that carries the proper tool, although we have fabricated our own before when we needed one late at night, lol.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Originally Posted by UnitZ28
just plug the sensor in on the other side and rewire it... a lot easier that all the **** you just went through... should be a green wire.... make sure you get the right one.
