NEW BEST's with room to improve
well here it is>>>>>>>>>>>
I am not sure on the exact weather conditions but temp was about 65 degree's.
changes since last time:
Bogart RT welded
15x3 w/26x4.5 Hoosier fronts
15x10 w/26x10 Hoosier drags
and Corbeau TRS seats in leather which added about 40+ lbs.
The car weighs in at about 3500lbs. I have done a few weight reduction(ac/heat,air bags,rear seat,low mount altenator,k-member/a-arms,manual rack,manual brakes,steering wheel,front sway bar,hood) but added the 10pt cage,heavier seats and a bunch of pretty things under the hood.
quick info on car:
96 Z28
RGR 383 solid roller 252/622 111lsa,RGR S2 LT1 heads
Hooker LT's w/ 4" Mufflex
TH400 w/Vig 4200
Moser 9" w3.90 and spool
n/a 415rwhp 424rwtq
TNT 572rwhp 628rwtq(200 shot&a bit lean),car likes to be fat
best N/A
11.08 off foot brake
122 mph
1.51 60ft
best N20
>The first pass i really babied out of the gates 10.1 @ 135.9 1.53 60ft.
>best ET 10.0 (1.44 60ft)and back fired,lost ignition and died at the 1000ft mark and coasted to a 121 mph,this would have been my 9.8 pass that i wanted and on my first time out

The spray runs were off the foot brake and rolling quickly into the throttle.I have to get a Race rear sway bar on the car,it's a hand full but fun

I run the car as i drive it on the street other then changing tires.This is a street car and driven alot on the dry days.
I will have the video's up soon
.
Larry
www.ls1speed.com
. i was a little confused as to why the car was torquing over so much since i thought you already had a drag sway bar on it so that makes sense now. i have a Wolfe on mine. car launches flat and goes straight, even without any preloading on the sway bar so far. Daren your car looked good,launched straight and ran a great #.
The car was definetly a hand full,i can't wait to get it to stick and run a real time.

Larry



