What are your car plans?
11-07-2007, 01:45 AM
#21
TECH Enthusiast
iTrader: (13)
Join Date: Nov 2005
Location: Indiana
Posts: 698
Likes: 0
Received 0 Likes
on
0 Posts
My goal is to make this thing open track worthy by next summer. That means LS1 or C5 brakes, maybe Konis and springs, and I'll possibly sell my wheel/tire setup for some 11" wide ZR1s and sticky rubber. Plus 3.73 Gears.
11-07-2007, 05:11 AM
#23
megasquirt(picking up Saturday)
96lb injectors
Seperate fuel system for race gas
anti roll bar
tubular k member
3 1/2" downpipe
built th400 with a better suited stall
Hyrbird 8.8 with 3.27's
295/50/16 mt dr
slam the car to the ground
Shooting for deep deep 10's on stock heads/cam, on the stock chrome wheels, and with the car still being quiet...ok I lied..I'd really like a 9, but I think it will take more tire to do so.
96lb injectors
Seperate fuel system for race gas
anti roll bar
tubular k member
3 1/2" downpipe
built th400 with a better suited stall
Hyrbird 8.8 with 3.27's
295/50/16 mt dr
slam the car to the ground
Shooting for deep deep 10's on stock heads/cam, on the stock chrome wheels, and with the car still being quiet...ok I lied..I'd really like a 9, but I think it will take more tire to do so.
11-07-2007, 02:23 PM
#25
TECH Regular
iTrader: (9)
Join Date: Oct 2005
Location: Yukon, Oklahoma
Posts: 431
Likes: 0
Received 0 Likes
on
0 Posts
Mine's supposed to be finished next week.
1. Golen 383/440 hp forged longblock with LE2 heads and ported intake
2. svo 30 lb injectors and walbro pump
3. custom made valve covers
4. built 4l60e
5. Strange Dana60 with 35 spline axles 373 ratio
4. chromoly driveshaft
5. slp double diamond subframe connectors
6. spohn adjustable torque arm
7. LS1 brake upgrade with new slotted rotors and pads
8. Coated 1 3/4 headers (jethot) into 3" true duals (dumped)
9. 2900 stall
10. msd opti
11. 58 mm throttle body
12. tune by pcm4less
13. 28" mickey thompson et streets
Lookin to spray 200 shot before LTX shootout. Hopefully low 11s N/A and into the 10s on spray??
1. Golen 383/440 hp forged longblock with LE2 heads and ported intake
2. svo 30 lb injectors and walbro pump
3. custom made valve covers
4. built 4l60e
5. Strange Dana60 with 35 spline axles 373 ratio
4. chromoly driveshaft
5. slp double diamond subframe connectors
6. spohn adjustable torque arm
7. LS1 brake upgrade with new slotted rotors and pads
8. Coated 1 3/4 headers (jethot) into 3" true duals (dumped)
9. 2900 stall
10. msd opti
11. 58 mm throttle body
12. tune by pcm4less
13. 28" mickey thompson et streets
Lookin to spray 200 shot before LTX shootout. Hopefully low 11s N/A and into the 10s on spray??
11-07-2007, 03:09 PM
#28
TECH Fanatic
iTrader: (9)
Join Date: Mar 2006
Location: N. Richland Hills
Posts: 1,266
Likes: 0
Received 0 Likes
on
0 Posts
Fully forged 383 with 4-bolt mains and splayed caps.
Dished JE Pistons
LT4 hogged out AFR heads
blower cam and valvetrain
F1A Procharger pushing about 20-25 psi
Any suspension part available
Dana 60 w/3.42's
T-56 built to handle about 1000hp
Pssh that's not even enough...
Dished JE Pistons
LT4 hogged out AFR heads
blower cam and valvetrain
F1A Procharger pushing about 20-25 psi
Any suspension part available
Dana 60 w/3.42's
T-56 built to handle about 1000hp
Pssh that's not even enough...
11-07-2007, 03:30 PM
#29
On The Tree
Join Date: Mar 2007
Location: Socal
Posts: 102
Likes: 0
Received 0 Likes
on
0 Posts
my future modlist in order of what I'm buying or doing
sfc
ground control coil overs
Cai
exhaust
headers
port tb
cam cc503 or custom grind
clutch
Le2 heads
what ya think, suggestions?
sfc
ground control coil overs
Cai
exhaust
headers
port tb
cam cc503 or custom grind
clutch
Le2 heads
what ya think, suggestions?
11-07-2007, 04:12 PM
#31
On The Tree
iTrader: (14)
Join Date: Aug 2007
Location: North of the Twin Cities
Posts: 175
Likes: 0
Received 0 Likes
on
0 Posts
I'm gathering the parts as we speak, but here is what I have planned for it in the spring:
Worked over heads
CC306
1.6 RR along w/ lifters, pushrods, etc
SVO 30lb injectors, racetronix fuelsystem
MSD cap/rotor, Taylor wires, MSD coil, 6AL MSD box
3200-3400 RPM stall from Fuddle
3.73 gears
Eibach pro-kit,
UMI suspension components
New rotors w/ Baer pads up front Hawks out back
Pacesetter coated headers and Y-pipe, TSP Rumbler catback
Trans cooler
ZR1's black in the center w/ a polished lip
6-point cage possibly
There has got to be some parts I am missing but thats the general plan. I plan on racing on a road course more than drag racing.
Worked over heads
CC306
1.6 RR along w/ lifters, pushrods, etc
SVO 30lb injectors, racetronix fuelsystem
MSD cap/rotor, Taylor wires, MSD coil, 6AL MSD box
3200-3400 RPM stall from Fuddle
3.73 gears
Eibach pro-kit,
UMI suspension components
New rotors w/ Baer pads up front Hawks out back
Pacesetter coated headers and Y-pipe, TSP Rumbler catback
Trans cooler
ZR1's black in the center w/ a polished lip
6-point cage possibly
There has got to be some parts I am missing but thats the general plan. I plan on racing on a road course more than drag racing.
11-07-2007, 05:07 PM
#32
12 Second Club
Join Date: Jun 2005
Location: Chitown
Posts: 1,119
Likes: 0
Received 0 Likes
on
0 Posts
Over winter ...
slicks and skinnies
Wideband o2 sensor
4" glasstek cowl hood
LS1 lid setup
bullet mufflers just for the track
A built transmission (even though mine is good but have heard its better to have a working trans rebuild then a blown one)
And paint my calipers
Then get back to the track and see what happens
slicks and skinnies
Wideband o2 sensor
4" glasstek cowl hood
LS1 lid setup
bullet mufflers just for the track
A built transmission (even though mine is good but have heard its better to have a working trans rebuild then a blown one)
And paint my calipers
Then get back to the track and see what happens
11-07-2007, 07:58 PM
#34
TECH Addict
iTrader: (6)
Join Date: Aug 2006
Location: Schiller Park (NW burb of Chicago)
Posts: 2,310
Likes: 0
Received 0 Likes
on
0 Posts
i am so confused as to what i am am doing with my car...if i keep it...this winter, all the body stuff will be fixed...3200 stall...3.73s...dyno tune...SFCs...etc...who knows...by january, i might be rocking another car depending on my funds...
11-10-2007, 01:59 AM
#35
TECH Fanatic
Join Date: Jul 2007
Location: long island new york
Posts: 1,420
Likes: 0
Received 0 Likes
on
0 Posts
11-11-2007, 08:49 AM
#37
TECH Addict
iTrader: (3)
Join Date: Feb 2006
Location: limbo
Posts: 2,123
Likes: 0
Received 0 Likes
on
0 Posts
LE2 and a 58mm TB. those were my plans for this year...but **** happens. my shocks are tired so I'l prolly end up getting some strano springs & bilsteins first tho... and some bars 
after that, sunnoco hood & new paint..
new rear whenever it decides to take a dump on me.
and a nitrous kit if I can swing it before 100k miles, if not rebuild the bottom end first.
after that, sunnoco hood & new paint..
new rear whenever it decides to take a dump on me.
and a nitrous kit if I can swing it before 100k miles, if not rebuild the bottom end first.
11-11-2007, 10:33 AM
#38
11 Second Club
iTrader: (10)
Join Date: Nov 2006
Location: york county, va.
Posts: 802
Likes: 0
Received 0 Likes
on
0 Posts
first, rob bank!
second, don't get caught!!
third, run 9's!!!
note to self! if second doesn't work, try agian in 5-10 years!!
second, don't get caught!!
third, run 9's!!!
note to self! if second doesn't work, try agian in 5-10 years!!
Last edited by grn95t/a; 11-11-2007 at 10:41 AM.
11-11-2007, 10:43 AM
#39
TECH Fanatic
iTrader: (3)
Join Date: Feb 2005
Location: Naples, FL
Posts: 1,118
Likes: 0
Received 0 Likes
on
0 Posts
After april...
Sell the TA, and build a stock suspension drag radial car.
25.5, 30" tall radials, Fulton big block, gigantic Pro-Charger, etc.
Probably stick with a 4th gen platform, just gonna start with a much cheaper car (think blown up ugly 6 banger 'bird or camaro)
Sell the TA, and build a stock suspension drag radial car.
25.5, 30" tall radials, Fulton big block, gigantic Pro-Charger, etc.
Probably stick with a 4th gen platform, just gonna start with a much cheaper car (think blown up ugly 6 banger 'bird or camaro)
