Yeah, just get longtubes with on emission hook ups, and get the block off plates from ebay cheap. jut make sure you get someone to program around them fo ryou

 

who could i get to program ? do i have the send my ecm off or what? how would they do it ?

 

ok i just looked at shoebox's website and the air pump that goes to the to the intake , how do i cap that off?

 

dude camarostripes, seriously man, get out there and do it it's so easy once you have it to look at. take off the egr and air pump and you'll see what you have to do. really you just have to get out there and do it. check out these guys for pcm tuning

madz28.com
pcmforless.com

I'm going with madz personally. they have a few different options, you can send in, or exhchange.. etc etc.. check out the sites.

 

Cap it off.. I mentioned that in the directions that I made in that one post..

 

Ok well I got it just making sure I didn't take something off that I wasn't suppose to ya know, better safe than sorry!!! Ok when I send my pcm or whatever do I tell them what I have done to the car so the can program it or what?

 

Yea..you tell them what you did and what you want done to it.

 

Now what u mean what I want done to it? What can u do to them? I am gettin longtubes, ory, egr/air delete, 160 stat, k&n cold air intake, short throw 6 speed,NGRTR55 plugs skip shift eliminator... Will any of that matter or make a difference or perform better by tuning the car?

 

Just call ion or read his web page

www.madz28.com

 

Exactly what you listed bro is what you can do to it..

 

Go to O'Reilly and buy assorted vaccuum caps (there should be a rather large one in there) use that one to cap off the AIR on the intake and there should be a small one that will fit on the EGR fitting on the intake manifold.

 

ok thanks everyone for the info i think i shouldnt be that hard...especially with a case of beer and pack of smokes lol........anyone wanna help lol

 

i gotta put longtubes and ory and delete air/egr

 

i have one more question...since i am getting race styly longtubes, i am deleting my air/egr, what do i do about the o2's since i am going with ory pipe? do i go ahead and plug them in and get some extensions for it or no?

 

yes you need extensions for the o2s

 

what kind and where can i get my gaskets for the headers at? also where can i get a set of o2 extenders for cheap?

 

Look for the Copper Header Gaskets.. everytime I have ordered the Coated Pacesetter LT's they have came with them Copper Gaskets.

 

I just want to throw this out there from my experience.STAY AWAY FROM COPPER GASKETS..They leaked on my car and on eveybody elses car that ran them

 

The merv where did u get ur coated headers at? And sidewayzz28 what kind of headers u prefer then?

 

any header that's in your budget.I was just staiting when it comes time to install don't use a copper or metel header gasket.

I have a set of almost new jet hot LTs for sale w/air & egr fittings if your interested shoot me a pm