Which Nitrous System for the Lt1
#1
Launching!
Thread Starter
Join Date: Dec 2007
Location: DeLaWaRe
Posts: 208
Likes: 0
Received 0 Likes
on
0 Posts
Which Nitrous System for the Lt1
Well iam just about ready to order some nitrous for the good old lt1 and i was not sure what kit to get. i dont want anything really big just a 75-150 wetshot... iam planing on just spraying a 100 shot i just want the exta if i desided to go bigger...
What are some good prices i can get for the
...Wet System
...Bottle heater
...Window switch
...Pruge Kit(Not sure if the 4na or the 6na will be ok for what iam doing)
...And is the stock fuel system ok for just 100 wetshot
Ill let u guys pick the system for me and lead me in the right direction please.
What are some good prices i can get for the
...Wet System
...Bottle heater
...Window switch
...Pruge Kit(Not sure if the 4na or the 6na will be ok for what iam doing)
...And is the stock fuel system ok for just 100 wetshot
Ill let u guys pick the system for me and lead me in the right direction please.
#3
Guest
Posts: n/a
We have a couple different option that will work for you.
The first is the Brand X single nozzle....
http://www.nitrousoutlet.com/catalog...roduct_id=3204
....this kit will support up to a 150 shot.
Second would be the Nitrous Outlet single nozzle...
http://www.nitrousoutlet.com/catalog...product_id=802
...this gives you 2 pressure port built into the valve (for gauges and pressure sensors), and comes with higher flowing solenoids and nozzle. Comes with jetting up to 150 HP but can be upgraded to flow up to 250 HP.
Third..and my suggestion, since you wanted upgradeability
Our LT1 Plate system....
http://www.nitrousoutlet.com/catalog...roduct_id=2806
...available in 52mm, 58mm, and monoblade versions. These come with jetting up to 200hp and can max flow up to 400 hp.
We have heaters that start @ $139, window switches @ $110, purge kits @ $65.
On the fuel system I would suggest upgrading to a Racetronix system to insure you have enough fuel supply. The kits start at $249 and can support up to 6-650whp.
P.S. good looking car in your avatar, gotta love the white ram air formula body
The first is the Brand X single nozzle....
http://www.nitrousoutlet.com/catalog...roduct_id=3204
....this kit will support up to a 150 shot.
Second would be the Nitrous Outlet single nozzle...
http://www.nitrousoutlet.com/catalog...product_id=802
...this gives you 2 pressure port built into the valve (for gauges and pressure sensors), and comes with higher flowing solenoids and nozzle. Comes with jetting up to 150 HP but can be upgraded to flow up to 250 HP.
Third..and my suggestion, since you wanted upgradeability
Our LT1 Plate system....
http://www.nitrousoutlet.com/catalog...roduct_id=2806
...available in 52mm, 58mm, and monoblade versions. These come with jetting up to 200hp and can max flow up to 400 hp.
We have heaters that start @ $139, window switches @ $110, purge kits @ $65.
On the fuel system I would suggest upgrading to a Racetronix system to insure you have enough fuel supply. The kits start at $249 and can support up to 6-650whp.
P.S. good looking car in your avatar, gotta love the white ram air formula body
Trending Topics
#9
Launching!
Thread Starter
Join Date: Dec 2007
Location: DeLaWaRe
Posts: 208
Likes: 0
Received 0 Likes
on
0 Posts
We have a couple different option that will work for you.
The first is the Brand X single nozzle....
http://www.nitrousoutlet.com/catalog...roduct_id=3204
....this kit will support up to a 150 shot.
Second would be the Nitrous Outlet single nozzle...
http://www.nitrousoutlet.com/catalog...product_id=802
...this gives you 2 pressure port built into the valve (for gauges and pressure sensors), and comes with higher flowing solenoids and nozzle. Comes with jetting up to 150 HP but can be upgraded to flow up to 250 HP.
Third..and my suggestion, since you wanted upgradeability
Our LT1 Plate system....
http://www.nitrousoutlet.com/catalog...roduct_id=2806
...available in 52mm, 58mm, and monoblade versions. These come with jetting up to 200hp and can max flow up to 400 hp.
We have heaters that start @ $139, window switches @ $110, purge kits @ $65.
On the fuel system I would suggest upgrading to a Racetronix system to insure you have enough fuel supply. The kits start at $249 and can support up to 6-650whp.
P.S. good looking car in your avatar, gotta love the white ram air formula body
The first is the Brand X single nozzle....
http://www.nitrousoutlet.com/catalog...roduct_id=3204
....this kit will support up to a 150 shot.
Second would be the Nitrous Outlet single nozzle...
http://www.nitrousoutlet.com/catalog...product_id=802
...this gives you 2 pressure port built into the valve (for gauges and pressure sensors), and comes with higher flowing solenoids and nozzle. Comes with jetting up to 150 HP but can be upgraded to flow up to 250 HP.
Third..and my suggestion, since you wanted upgradeability
Our LT1 Plate system....
http://www.nitrousoutlet.com/catalog...roduct_id=2806
...available in 52mm, 58mm, and monoblade versions. These come with jetting up to 200hp and can max flow up to 400 hp.
We have heaters that start @ $139, window switches @ $110, purge kits @ $65.
On the fuel system I would suggest upgrading to a Racetronix system to insure you have enough fuel supply. The kits start at $249 and can support up to 6-650whp.
P.S. good looking car in your avatar, gotta love the white ram air formula body
Ps i would love to by the plate kit but i really dont have enough money for a new tb being iam running the stock one now so i was thinking of just going to go with a single nozzle.
....are ur kits rated at the wheels or flywheel.
#10
Guest
Posts: n/a
Or you can run a nozzle kit now and upgrade to the plate later.
#12
Launching!
Thread Starter
Join Date: Dec 2007
Location: DeLaWaRe
Posts: 208
Likes: 0
Received 0 Likes
on
0 Posts
the kits are rated for wheel power....if you want the plate kit and are planning on running a 58mm TB in the future. You can get the 58mm plate now, bore the intake openings to 58mm, then reinstall the stock TB. This will not cause any issue.
Or you can run a nozzle kit now and upgrade to the plate later.
Or you can run a nozzle kit now and upgrade to the plate later.
#13
TECH Addict
iTrader: (39)
I've heard tons of great things about both sponsors here on ls1tech! With that being said I bought from both of them. I purchased the kit, heater, purge, filter from Harris Speed Works and I got a window switch and some other misc. fittings from Nitrous Outlet. Both were very helpful and put up with my nonstop PM's and calls. Reason I went with the HSW kit is because it had the jetting I liked so I wouldn't have to buy more jets and it was on sale for a ridiculous low price around Christmas time! I like Nitrous Outlet's plate but I, like you, just couldn't justify spending all that money at once. If I want I could always purchase just the plate from Nitrous Outlet and connect it to my HSW kit. Anyway you go you will be treated right!
#14
Launching!
Thread Starter
Join Date: Dec 2007
Location: DeLaWaRe
Posts: 208
Likes: 0
Received 0 Likes
on
0 Posts
I've heard tons of great things about both sponsors here on ls1tech! With that being said I bought from both of them. I purchased the kit, heater, purge, filter from Harris Speed Works and I got a window switch and some other misc. fittings from Nitrous Outlet. Both were very helpful and put up with my nonstop PM's and calls. Reason I went with the HSW kit is because it had the jetting I liked so I wouldn't have to buy more jets and it was on sale for a ridiculous low price around Christmas time! I like Nitrous Outlet's plate but I, like you, just couldn't justify spending all that money at once. If I want I could always purchase just the plate from Nitrous Outlet and connect it to my HSW kit. Anyway you go you will be treated right!
#16
FormerVendor
iTrader: (6)
Join Date: Nov 2007
Location: Glenolden, PA
Posts: 1,593
Likes: 0
Received 0 Likes
on
0 Posts
https://ls1tech.com/forums/eastern-members/908638-spring-install-special.html
that package includes the entire system and installation. If you want to install yourself and have any questions on our kits, please feel free to PM me.
Last edited by Mike@HSW; 04-25-2008 at 12:56 PM.
#17
Launching!
Thread Starter
Join Date: Dec 2007
Location: DeLaWaRe
Posts: 208
Likes: 0
Received 0 Likes
on
0 Posts
Where are you at in delaware? we are actually running a install special at the moment if you dont want to be bothered with installing the kit yourself. check out package C, i guarantee you'll never find a better price for a total package like that. plus you can be assured it will be installed properly.
https://ls1tech.com/forums/showthread.php?t=908638
that package includes the entire system and installation. If you want to install yourself and have any questions on our kits, please feel free to PM me.
https://ls1tech.com/forums/showthread.php?t=908638
that package includes the entire system and installation. If you want to install yourself and have any questions on our kits, please feel free to PM me.
great prices as well
#18
FormerVendor
iTrader: (6)
Join Date: Nov 2007
Location: Glenolden, PA
Posts: 1,593
Likes: 0
Received 0 Likes
on
0 Posts
It would be about a 45-50 minute drive. i live in media pa and it takes about a30 minutes. You could save on shipping and just pick the kit up if you would like. We might be having a dyno day soon, keep your eye on the eastern section
#19
Launching!
Thread Starter
Join Date: Dec 2007
Location: DeLaWaRe
Posts: 208
Likes: 0
Received 0 Likes
on
0 Posts
yea i would problly just drive up.... i cant seem to find the rpm window switchs on ur guys page??? and what purge kit would i go with for the 150 single nozzle wet shot kit... 4an or 6an???