Need M6 Part..
Need M6 Part.. What I need is a 1993-1996 M6 Plastic Cover Plate/Shift Boot that goes on the Center Console around the Shifter. It has the little decal on it that has the shift pattern.
Anyone have one lyin around?
Anyone have one lyin around?
GM no longer carries them or even sells them, what I did when I had that console I used a thin piece of Aluminum and contoured it around to fit and even found out it works better that the cheap plastic bezal that came with the console.
It's going to be hard to find if you do want the factory piece though.
It's going to be hard to find if you do want the factory piece though.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
I might try a different way to get one..
I got ahold of the Leather(whatever it is) Shifter Boot that goes in the Interior..when I get the chance I'm goin to the Junk Yard and getting another A4 Console Piece. I'm going to take that one apart and cut it all out in the Center to where it will measure up to the M6 piece. Then I will attach the Boot to that and put a piece of Aluminum in the open spot. I'll put the M6 Shift Pattern Decal on that if I can find one.
I got ahold of the Leather(whatever it is) Shifter Boot that goes in the Interior..when I get the chance I'm goin to the Junk Yard and getting another A4 Console Piece. I'm going to take that one apart and cut it all out in the Center to where it will measure up to the M6 piece. Then I will attach the Boot to that and put a piece of Aluminum in the open spot. I'll put the M6 Shift Pattern Decal on that if I can find one.