What is this ticking noise?
09-06-2009, 09:20 PM
#81
FWIW, my rockers set with 0 preload sound very similar.
You can apply a little additional preload to quiet them down for peace of mind.
I did so with my previous setup.
You can apply a little additional preload to quiet them down for peace of mind.
I did so with my previous setup.
09-06-2009, 10:23 PM
#83
TECH Addict
iTrader: (15)
Join Date: Jun 2002
Location: IL
Posts: 2,642
Likes: 0
Received 0 Likes
on
0 Posts
I had a little bit of the same problem..Adjusted the rockers 3 different times and on the last time, I found 2 different rockers that were a bit looser than the rest. The kicker was, that we noticed that the pushrods weren't running in-between the guideplates like they should. They were rubbing on one side of the pushrods...Adjusted the guideplates, and rockers, that sucker sounds like a sewing machine 
Just something else to check. See how the pushrods are running in the guideplates.
Just something else to check. See how the pushrods are running in the guideplates.
09-06-2009, 10:57 PM
#84
hey man,
i have the same problem. but mines worse. it makes a loud squeaky noise along with the clicking. i seafoamed my car and the noise when completly away, but then when i did the oil change after 100 miles...it came back. idk...after a while it went away again, but then it came back. idk what it could be...try seafoaming it. maybe you'll have better luck than me.
i have the same problem. but mines worse. it makes a loud squeaky noise along with the clicking. i seafoamed my car and the noise when completly away, but then when i did the oil change after 100 miles...it came back. idk...after a while it went away again, but then it came back. idk what it could be...try seafoaming it. maybe you'll have better luck than me.
