hurst billet plus centering springs
06-04-2009, 09:58 PM
#2
I don't know.
But on a stock-installed Hurst, it's:
on the drivers side there's a .480 o.d. spring
.872 long
.064 wire
6.75 coils
on the passenger side it's about the same spring plus a smaller .302 o.d. spring inside that with
.924 length
.043 wire
on top of each spring stack side is a .481 round .042 thick steel shim.
But on a stock-installed Hurst, it's:
on the drivers side there's a .480 o.d. spring
.872 long
.064 wire
6.75 coils
on the passenger side it's about the same spring plus a smaller .302 o.d. spring inside that with
.924 length
.043 wire
on top of each spring stack side is a .481 round .042 thick steel shim.
