Trying to install my Tick MC. Is my feed line upside down?
11-07-2009, 08:32 PM
#1
Trying to install my Tick MC. Is my feed line upside down? I know this is probably a stupid question, but I wanted to make sure before I install this. Both the hydraulic line and the feed line fitting from the reservoir are pointed down. Do I need to turn the white plastic part 180deg so its pointed up?
11-07-2009, 09:06 PM
#2
On The Tree
Join Date: Jul 2004
Location: Tulsa, Ok.
Posts: 112
Likes: 0
Received 0 Likes
on
0 Posts
Both lines should point towards the passenger side... at least that's how mine was oriented....
OH BTW, It IS cool to see a local on here. However, I haven't made it to the track in almost 2 years. Having 3 young daughters and working a full-time job will do that to a man... lol
OH BTW, It IS cool to see a local on here. However, I haven't made it to the track in almost 2 years. Having 3 young daughters and working a full-time job will do that to a man... lol
Probably would have been blatently obvious had I just put it in instead of looking at it lol.. Thanks for the input Mike 
