Manual Transmission T56 | T5 | MN12 | Clutches | Hydraulics | Shifters

c5 transmission

Thread Tools
 
Search this Thread
 
Old 03-02-2010 | 10:57 PM
  #1  
devious's Avatar
Thread Starter
Staging Lane
iTrader: (1)
 
Joined: Aug 2007
Posts: 50
Likes: 0
From: Lubbock,Tx
Default c5 transmission

Is the slave cylinder the same in the c5 as the 98-02 f body, I just sold my Camaro and am about to put a clutch in my frc and was curious if my new one from the old car will work!
Old 03-03-2010 | 08:28 PM
  #2  
LS123's Avatar
Banned
iTrader: (11)
 
Joined: Mar 2004
Posts: 376
Likes: 0
From: Rowing 6 speeds Maryland
Default

Yes they are the same but the only difference is the hydraulic lead in line to the slave. The F body has a short pipe but the Vette has a braided line that is longer. Just use a punch and knock the pin out and swap it with the Vtte unit and it will work fine.




All times are GMT -5. The time now is 02:25 PM.