Manual Transmission T56 | T5 | MN12 | Clutches | Hydraulics | Shifters

Clutch Pedal Pulses After Clutch Swap

Old 11-03-2010, 08:59 PM
  #1  
TECH Apprentice
Thread Starter
iTrader: (4)
 
1quickTransAm's Avatar
 
Join Date: Apr 2008
Posts: 393
Likes: 0
Received 0 Likes on 0 Posts

Default Clutch Pedal Pulses After Clutch Swap

Any ideas why? It pulses after letting it out fully and while driving at parking lot speeds (haven't tried any faster yet).

I've only done parking lot driving for about 20 seconds so for all I know this might be normal until the clutch seats properly, but I wanted to check before doing driving it more. Thanks!
Old 11-03-2010, 09:20 PM
  #2  
TECH Resident
iTrader: (3)
 
25thhawk's Avatar
 
Join Date: Jul 2003
Posts: 813
Likes: 0
Received 1 Like on 1 Post

Default

I don't know if I would call it normal. But after I swapped the clutch in my 95 hawk, i had the same issue. There were alot of people who told me it is normal. I now have about 5k on the clutch, still pulses alittle, but no problems.

Ryan
Old 11-03-2010, 09:43 PM
  #3  
TECH Apprentice
Thread Starter
iTrader: (4)
 
1quickTransAm's Avatar
 
Join Date: Apr 2008
Posts: 393
Likes: 0
Received 0 Likes on 0 Posts

Default

I would call mine more than "a bit". It is easily noticeable, not something that you need to really pay attention to in order to notice it. It pulses enough that it would bug the heck out of me.


Thread Tools
Search this Thread

All times are GMT -5. The time now is 08:47 PM.