Shifter Boot Retainer Ring
Thread Starter
Teching In
Joined: Jan 2011
Posts: 21
Likes: 0
Shifter Boot Retainer Ring Guys. There is an old thread out there for anyone looking for a replacement shifter boot ring. Farmer2 is his user on the forums. Here is a link to his eBay store for anyone interested.
www.NOT-A-SPONSOR.com.org.gov.net
Looks like a great solution to a known problem.
If this violates any rules please delete.
www.NOT-A-SPONSOR.com.org.gov.net
Looks like a great solution to a known problem.
If this violates any rules please delete.
Last edited by THRTITH; Aug 3, 2011 at 11:46 AM.
There are better and less expensive solutions. The stock ring is made of ABS, which can be welded stronger than the original material. A $3 can of ABS Cement (not the multi-purpose stuff) from any good plumbing/home supply will do this.
Trending Topics
the original GM one was $25.. there is a guy on ebay right now selling for $29
ive been looking for an alternative to replace mine too, i was going to glue it back together but im missing a piece..
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
On The Tree
Joined: Apr 2010
Posts: 137
Likes: 0
From: Just because the voices aren't real, doesn't mean they're not right!
After repairing/patching the old ring you wind up with a repaired/patched POS ABS plastic that GM should have never approved in the first place. BTDT.
Got my wire-type piece on the Bay from the same guy (Farmerto) that makes them for 6le. Excellent quality, end of problem.
Got my wire-type piece on the Bay from the same guy (Farmerto) that makes them for 6le. Excellent quality, end of problem.
