squeaky clutch petal
03-19-2012, 01:16 PM
#1
Launching!
Thread Starter
iTrader: (31)
Join Date: May 2008
Location: Arlington
Posts: 267
Likes: 0
Received 0 Likes
on
0 Posts
squeaky clutch petal hey guys so my car's been in the shop for about 2 weeks getting all the tranny work done and now that i got it back the clutch petal squeaks...any idea what it could be? (i've already contacted the shop and they said once they finish with the car they're working on right now they'll have me take it back)
info on what i did and what shop did after: car wouldn't go into gear and clutch petal squeaked so i figured it was the master cyl. while replacing that i noticed the return spring was broken. so i replaced it and the master cyl. long story short it didnt fix the going into gear but fixed the squeak. took to the shop and the replace clutch, flywheel, master cyl, flushed and bleed the system. car goes into gear now but petal sqeaks
info on what i did and what shop did after: car wouldn't go into gear and clutch petal squeaked so i figured it was the master cyl. while replacing that i noticed the return spring was broken. so i replaced it and the master cyl. long story short it didnt fix the going into gear but fixed the squeak. took to the shop and the replace clutch, flywheel, master cyl, flushed and bleed the system. car goes into gear now but petal sqeaks
03-20-2012, 12:58 AM
#5
Launching!
Thread Starter
iTrader: (31)
Join Date: May 2008
Location: Arlington
Posts: 267
Likes: 0
Received 0 Likes
on
0 Posts
ok so not the rod that goes into the master cyl? just the ball joint thing that the master connects to the petal? i'll try that tomorrow! thanks alot!!
