batman_ls1

alright guys like the title says my tranny decided to throw my clutch threw my floor board and and into my dash now the tranny its self is still good so i was wondering who do you guys recommend to rebuild it to hold around 700RWHP??

so far its between tick and rpm

Ferocity02

iTrader: (60)

Full insides with a Viper output shaft should do it.

burbalanche

iTrader: (3)

ive herd lots of good things about rpm and they did upgrades to my trans also...

batman_ls1

you have a t56?? what all did they do??

flintwrench69

iTrader: (11)

Wow were you racing when it happened? What clutch were you running?

BarneyMobile

iTrader: (4)

First things first, get an SFI bellhousing!!!!!!!!! That would have kept the clutch out of your dash and keeps your feet safe! Your transmission isn't the culprit. It just sounds like your clutch just came apart. What clutch was in there? As for a clutch to hold 700hp you may wanna start looking at a twin disc setup.

batman_ls1

yea i was racing at the time it blew is second gear i was running a centerforce clutch im going be running the monster clutch now i only said 700 because of the motor im building on the side right now shes only putting dwn 406rwhp and 376tq.. theres a guy on here he owns txmotorsports and he said he can build be a tranny to hold that power have any of you heard of them

Sales@Tick

iTrader: (3)

First off, I super glad you didnt get hurt!!! Maybe you should invest in a quicktime bellhousing so you can keep you legs/feet.

Sounds like the input shaft might have broke. We make a Viperized level 3 build that is good for 750rwtq!!! Check it out on the link

http://www.tickperformance.com/tick-...camaro-firebird/

batman_ls1

[QUOTE=Chris@Tick;16322474]First off, I super glad you didnt get hurt!!! Maybe you should invest in a quicktime bellhousing so you can keep you legs/feet.

Sounds like the input shaft might have broke. We make a Viperized level 3 build that is good for 750rwtq!!! Check it out on the link

http://www.tickperformance.com/tick-...camaro-firebird/[/QUOTE


i called you guys and one of your employees told me it will be at least 60 days before i even see a transmission i cant wait that long i was going to order a tranny from you guys but sorry 60 days is just to long

smokeshow

iTrader: (17)

Maybe you should just quit dicking around and install some driver mod in the form of a 4L80e.

batman_ls1

smokeshow i already beat you get out of here haha

smokeshow

iTrader: (17)

You might have beat me with my keys in my pocket.

batman_ls1

haha its not my fault you left off idle

smokeshow

iTrader: (17)

Had a nice drive home, too.

batman_ls1

we never raced after that

Sales@Tick

iTrader: (3)

we are 60 days out if you want us to send you a transmission built. If you send us yours we will build it when it gets here and you will have it back within 7-12 business days