SNLPerformance

iTrader: (15)

Here's a spy shot of a twin we sent out to a C6 road race car. This one isn't engraved with "Monster Clutch Co. Twin - Made in Texas", but, you get the idea.

Exidous

iTrader: (11)

One thing I totally forgot to ask about....floater plate rattle. Does it exist in these units and are the aluminum standoffs able to not wear from the floater plate. I also don't think that green is mean enough. :-p

Edit: That pic looks like a triple plate.

superGTO

iTrader: (2)

Marking this for the next time I need one.

SNLPerformance

iTrader: (15)

The pic is a twin, it's already going in the C6.

Floater plate "rattle" is very, very minimal. If you have a catback and stock car you're going to have to listen for it closely, if you have a cam only or anything more aggressive than that you won't hear it at all. I can't hear it at all in my heads/cam GTO unless I'm under the car on a lift and stick my head up to the bellhousing... then I can barely make it out. LOL

SNLPerformance

iTrader: (15)

Thanks for all the orders so far guys, we appreciate the support!

dr_whigham

iTrader: (49)

I was going to ask about the master... Thanks for clearing that up. I'd rather a GM unit with drill mod myself. Drill mod is ok, right?

Stage 1 for me. Period. Case closed. Just need the Arkansas property to sell!

sick02ss

iTrader: (3)

Looks like ill be getting a level 3 when I get my procharger. already have a level 6 or 5 cant remember off the top of my head...but its the 800hp one and then, a level 1 on my dd love these clutches!

slvrbackls1

iTrader: (2)

Well looks like if my Stage 4 ever gives up( this thing wont die) I know what I can step up to.

SNLPerformance

iTrader: (15)

Yes sir, drill mod is good - give me a call and we'll get you taken care of.

Thanks man, give me a call!

LOL, just let me know. Congrats on your 9 second pass btw!

slvrbackls1

iTrader: (2)

Thanks. Hope to be chasing down Ray here in a couple weeks.

westtexasbuff

iTrader: (40)

If my McLeod RXT can't hold up the power I plan on making at the track I'll be giving you all a call for a stage 3 twin. How is the pedal on these? I'm assuming it's a rough engagement?

Exidous

iTrader: (11)

From what Steve has told me, it is similar to the singles they sell with the same disk material. So the Level 3 feels like a Stage 3 but holds 1000rwtq. From what I have read the Stage 3 is quite street-able for the power it can hold.

dementia

iTrader: (4)

I had figured this was never coming out lets add another thing i need to put onto my must buy list. One of these clutches is making my next 3 mods to the TA

stock01ws6

Thank you Steve. got the clutch like promised. SUPER NICE PICE. It will be going in tomarrow. I should be done putting trans back together today, and have feed back about it by the end of the week. This is that level 2.

I should have about 600 miles broke in by 21st of month, and at the dyno that day. There might be a chance if the dyno goes well, the track that night. If not then dyno during the week and at the track that fallowing weekend.

Virgel

JRMClassics

iTrader: (16)

Just pulled the trigger on a Level 1 for the Chevelle.....too bad it will sit on the shelf till the body comes back from paint but I couldn't resist. What a great guy to deal with on the phone, thanks Steve!!!

Mike454SS

iTrader: (4)

Any more pictures???

Exidous

iTrader: (11)

Steve gave me an update of a weekish :-) on Thursday to get mine in. Waiting on the anodize folks. As soon as it comes in I'll take some really nice big pictures of it and the install.

Mike454SS

iTrader: (4)

Any plans to offer anything halfway between the 2 and 3?...like a 2+ or something? Are the HP numbers you're quoting flywheel or rear wheel?

Exidous

iTrader: (11)

I'm pretty sure they rate at whp.

SNLPerformance

iTrader: (15)

No sir, currently we're not thinking along those lines. We do have the ability to build just about anything, so if what you see isn't what you want give us a call and we can custom build you something. We've found in the past that offering too many options just confuse people, give us a call and we'll take care of you.

And we rate all our clutches to the rear tires.