Fastest Six Speed List
#126
TECH Apprentice
iTrader: (4)
Join Date: Nov 2006
Location: Lawrenceville, GA
Posts: 329
Likes: 0
Received 0 Likes
on
0 Posts
Well you ain't using the clutch like a standard and that's for sure. Maybe I should refrase what I was asking. Who on that list is using a synchronized shifted trans. Not face plated where all you do is use it in first and barely tap the clutch to get it to go in. I'm looking for a true shifted 6 speed.
#127
TECH Regular
iTrader: (11)
Join Date: Jun 2005
Location: Rochester N.Y.
Posts: 484
Likes: 0
Received 0 Likes
on
0 Posts
Well you ain't using the clutch like a standard and that's for sure. Maybe I should refrase what I was asking. Who on that list is using a synchronized shifted trans. Not face plated where all you do is use it in first and barely tap the clutch to get it to go in. I'm looking for a true shifted 6 speed.
How do you use a clutch then? I don't think you understand what
The differences are between a synchronized tranny and one with
Faceplated gears.
Actually with a faceplated tranny you better be more precise with
Your shifting because there's no syncros to help it go into the
Correct gear. It will go from 2nd to 1st or 3rd to 2nd just as
Easy as going into the right gear!
#128
8 Second Club
iTrader: (3)
How do you use a clutch then? I don't think you understand what
The differences are between a synchronized tranny and one with
Faceplated gears.
Actually with a faceplated tranny you better be more precise with
Your shifting because there's no syncros to help it go into the
Correct gear. It will go from 2nd to 1st or 3rd to 2nd just as
Easy as going into the right gear!
The differences are between a synchronized tranny and one with
Faceplated gears.
Actually with a faceplated tranny you better be more precise with
Your shifting because there's no syncros to help it go into the
Correct gear. It will go from 2nd to 1st or 3rd to 2nd just as
Easy as going into the right gear!
2 fast 2000, You must be thinking of a true clutchless which is in gear at all times, even during a shift.
#129
Well you ain't using the clutch like a standard and that's for sure. Maybe I should refrase what I was asking. Who on that list is using a synchronized shifted trans. Not face plated where all you do is use it in first and barely tap the clutch to get it to go in. I'm looking for a true shifted 6 speed.
There is no synchronized T56 fast list...
Garth Weaver went 7.98@183. He holds the T56 overall record.
#130
TECH Apprentice
iTrader: (4)
Join Date: Nov 2006
Location: Lawrenceville, GA
Posts: 329
Likes: 0
Received 0 Likes
on
0 Posts
Look guys I'm not hating or throwing stones. You guys know what I mean. I've had a face plated trans and regardless of what you all say it's not the same. It was twice as easy to shift at high rpm's. I only had to tap the clutch. I got rid of it because I had a hell of a time on the street driving it because only on certain rare occasions could I get it to down shift. I'm well aware of what I'm talking about. So I'm just asking who on that list is the fastest without a face plated T56? I'm just curious. That's all. If nobody knows that's fine also. Thanks....
#133
10 Second Club
iTrader: (5)
Join Date: Nov 2007
Location: Cincinnati
Posts: 1,052
Likes: 0
Received 0 Likes
on
0 Posts
Look guys I'm not hating or throwing stones. You guys know what I mean. I've had a face plated trans and regardless of what you all say it's not the same. It was twice as easy to shift at high rpm's. I only had to tap the clutch. I got rid of it because I had a hell of a time on the street driving it because only on certain rare occasions could I get it to down shift. I'm well aware of what I'm talking about. So I'm just asking who on that list is the fastest without a face plated T56? I'm just curious. That's all. If nobody knows that's fine also. Thanks....
#137
TECH Fanatic
iTrader: (17)
no 8 second pass, but i got a little ink for my 10.87 pass i posted about the other day
http://bangshift.com/blog/gear-bangi...ampaign=Buffer
http://bangshift.com/blog/gear-bangi...ampaign=Buffer