shout Out
#1
shout Out
Just purchased an ls6 (didn't need ls7) clutch kit,pilot bearing,throwout bearing,flywheel, slave, and master from Mike at Eastcoast performance-corvettes. Great guy to deal with as has been mentioned before on this site.
Had the whole deal installed at Kasten Automotive in Pennsauken NJ. Mark is a great guy and a great mechanic. I have known him for 10-12 years.
I have a 2001 SS camaro with about 145500 miles with original clutch. Not any more What a difference the new stuff makes. Just a quick comment on the oem
LS6, there was still life left in the clutch. the slave and throwout were completely shot. There was NOTHING left of the pilot bearing at all. Now all the
noise and vibration are gone. Thanks Mike at Eastcost and Mark at Kasten.
Had the whole deal installed at Kasten Automotive in Pennsauken NJ. Mark is a great guy and a great mechanic. I have known him for 10-12 years.
I have a 2001 SS camaro with about 145500 miles with original clutch. Not any more What a difference the new stuff makes. Just a quick comment on the oem
LS6, there was still life left in the clutch. the slave and throwout were completely shot. There was NOTHING left of the pilot bearing at all. Now all the
noise and vibration are gone. Thanks Mike at Eastcost and Mark at Kasten.