LT1 clutch slip at high rpm shift?
#1
TECH Veteran
Thread Starter
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Have the Competition Clutch 2+ with around 3k mi
Hydraulics are stock with about 30k mi
383 making around 390 rwhp, 412 rwtq
notice now on the 2-3 shift at 6k the clutch just slips unless I lift the gas then it will engage.
pedal feels "normal" and does not stick to the floor
Can smoke the tires 1st and 2nd but hitting 3rd just clutch slip...and the smell of burnt clutch
Normally I would just assume clutch is going but this deal has me thinking if "hydraulics" are giving up not responding fast enough
comments appreciated
Hydraulics are stock with about 30k mi
383 making around 390 rwhp, 412 rwtq
notice now on the 2-3 shift at 6k the clutch just slips unless I lift the gas then it will engage.
pedal feels "normal" and does not stick to the floor
Can smoke the tires 1st and 2nd but hitting 3rd just clutch slip...and the smell of burnt clutch
Normally I would just assume clutch is going but this deal has me thinking if "hydraulics" are giving up not responding fast enough
comments appreciated