Look What I Finally Bought
#1
Launching!
Thread Starter
iTrader: (3)
Join Date: Nov 2003
Location: Florida
Posts: 218
Likes: 0
Received 0 Likes
on
0 Posts
Look What I Finally Bought
Yeap thats the culprit supposedly of the 3rd gear popping out i hope.. Its a picture of a steel 3-4 shift fork i purchased from D&D.
WHat other parts should i buy before trying to fix my 3rd gear from popping out. i was thinking i should also get a 3-4 synchronizer. And just How much should i expect paying someone to put these parts in. I cant do it myself i do not have the tools. I can however take the transmission out myself and take it somewhere to have it done.. any helpful hints/ tricks or anything needed. i want to do this right the first time and be done, for a while!.
WHat other parts should i buy before trying to fix my 3rd gear from popping out. i was thinking i should also get a 3-4 synchronizer. And just How much should i expect paying someone to put these parts in. I cant do it myself i do not have the tools. I can however take the transmission out myself and take it somewhere to have it done.. any helpful hints/ tricks or anything needed. i want to do this right the first time and be done, for a while!.
#3
TECH Regular
iTrader: (1)
Man It sure helps when people have their Location up , so we don't have to ask.
So
Where are ya located.
You might as well get the Basic Rebuilt kit, 3-4 synchro assembly, probably third gear too.
The kit is 155 from thegearbox.org
the sychro assembly is about 110 bucks
third gear runs about the same.
they have them all listed.
So
Where are ya located.
You might as well get the Basic Rebuilt kit, 3-4 synchro assembly, probably third gear too.
The kit is 155 from thegearbox.org
the sychro assembly is about 110 bucks
third gear runs about the same.
they have them all listed.