High pitched squeal after clutch install... *Vid inside*
04-06-2015, 03:40 PM
#1
High pitched squeal after clutch install... *Vid inside* ***see post 3 for resolution***
Just installed a new clutch and now have a very high pitched whine that I cant track down. It does it regardless if the clutch is in or out, in gear or not, so I know its not the pilot bushing. It seems to be coming from around the starter/bellhousing area. It is RPM related and gets extremely high in pitch as the RPM go up. Im really at a loss here, check out the video. Any input?
Just installed a new clutch and now have a very high pitched whine that I cant track down. It does it regardless if the clutch is in or out, in gear or not, so I know its not the pilot bushing. It seems to be coming from around the starter/bellhousing area. It is RPM related and gets extremely high in pitch as the RPM go up. Im really at a loss here, check out the video. Any input?
Last edited by Rob WS6; 04-06-2015 at 04:38 PM.
04-06-2015, 04:38 PM
#3
Never mind, Im an idiot... apparently I pinched the o2 wire between the starter and bellhousing when I was putting it back together. Was doing it at night and somehow must have missed it. No more whine, but my o2 wire sure needs some help! 