Manual Transmission T56 | T5 | MN12 | Clutches | Hydraulics | Shifters

CTS-V t56 on its way out, whos a good reputable builder?

Thread Tools
 
Search this Thread
 
Old 07-24-2015 | 12:28 PM
  #1  
LeanPocket's Avatar
Thread Starter
TECH Fanatic
iTrader: (6)
 
Joined: Apr 2011
Posts: 1,122
Likes: 1
From: Corpus Christi Texas
Default CTS-V t56 on its way out, whos a good reputable builder?

Well, I have some tranny problems going on right now for my 04 cts v. 204,000 miles.

It goes into every gear as intended, and even reverse without any problems. But after 57MPH my car has a sound like a bearing went out, like a whirling sound, and it sounds like something is wobbling as well, and i can feel it in my shifter. Its not the carrier bearing, and No idea what it could be.. Thankfully I can still commute on it.

Any suggestions as to who can rebuild it reliably? Much thanks guys.
Old 07-24-2015 | 12:40 PM
  #2  
BMR Sales2's Avatar
LS1Tech Premium Sponsor
iTrader: (40)
 
Joined: Nov 2008
Posts: 3,451
Likes: 17
From: Seffner, FL
Default

I have always had very good luck with Jeremy and the guys over at RPM Transmissions.
__________________
Glenn ***
Sales Tech
www.bmrsuspension.com
813.986.9302


Find a Quality alignment shop near you!
Old 07-25-2015 | 10:43 AM
  #3  
LeanPocket's Avatar
Thread Starter
TECH Fanatic
iTrader: (6)
 
Joined: Apr 2011
Posts: 1,122
Likes: 1
From: Corpus Christi Texas
Default

Thanks, I dont think they would happen to have any ctsv t56 cores..
Old 07-27-2015 | 09:07 AM
  #4  
Jeremy@RPMTransmissions's Avatar
FormerVendor
iTrader: (12)
 
Joined: Sep 2010
Posts: 1,553
Likes: 1
From: Anderson Indiana
Default

Originally Posted by LeanPocket
Thanks, I dont think they would happen to have any ctsv t56 cores..
We have plenty of cores ready to build. Give us a call if you need anything.




All times are GMT -5. The time now is 05:15 PM.