Manual Transmission T56 | T5 | MN12 | Clutches | Hydraulics | Shifters

clutch wants to grab WAY to soon.. need help

Thread Tools
 
Search this Thread
 
Old 06-30-2004 | 10:51 AM
  #1  
AZ01SLPSS's Avatar
Thread Starter
Teching In
 
Joined: Mar 2004
Posts: 27
Likes: 0
From: PHX
Default clutch wants to grab WAY to soon.. need help

ok, instead of the clutch grabing some after u let out like normal, whats happening to me is.. ill puch in the clutch, put into 1st, and the second i start to let the clutch out, it grabs like im just popping the clutch, but im only letting it out maybe 1/2-1 inch and its grabbing the whole way.. i cant even count how many tiems ive stalled or almost stalled the car today. any ideas?
Old 06-30-2004 | 12:37 PM
  #2  
Bugsquawsher's Avatar
TECH Regular
iTrader: (1)
 
Joined: Dec 2002
Posts: 467
Likes: 1
From: Lexington, Texas, USA
Default

What Master and Clutch do you have?
Old 06-30-2004 | 01:18 PM
  #3  
AZ01SLPSS's Avatar
Thread Starter
Teching In
 
Joined: Mar 2004
Posts: 27
Likes: 0
From: PHX
Default

stock and stock
Old 06-30-2004 | 01:25 PM
  #4  
KillaP's Avatar
On The Tree
 
Joined: Mar 2004
Posts: 177
Likes: 0
From: Elmira, NY
Default

did u just get your clutch replaced or did this just start happening out of the blue?
Old 06-30-2004 | 01:31 PM
  #5  
MIGHTYMOUSE's Avatar
TECH Senior Member
iTrader: (59)
 
Joined: Nov 2001
Posts: 10,010
Likes: 46
From: Virginia
Default

bleed it and bleed it., if that dont work shim the slave, or make your master cyl. adjustable.
Old 06-30-2004 | 01:46 PM
  #6  
Bugsquawsher's Avatar
TECH Regular
iTrader: (1)
 
Joined: Dec 2002
Posts: 467
Likes: 1
From: Lexington, Texas, USA
Default

Yea
Bleed it first
if that dont' fix it
Replace the slave. while you got it out
Pull the master and do the drill mod if you haven't already
Old 07-02-2004 | 01:33 PM
  #7  
AZ01SLPSS's Avatar
Thread Starter
Teching In
 
Joined: Mar 2004
Posts: 27
Likes: 0
From: PHX
Default

It just started to happin. How do u bleed it?




All times are GMT -5. The time now is 05:51 AM.