When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Of course they do, they're just integral with the release bearing.
that's why it's called a hydraulic release bearing.
Slave cylinders are outside the bell housing and push a fork that holds the throw out bearing. They are 2 completely different set ups. Lt1s and turdgens had slave cylinders.
that's why it's called a hydraulic release bearing.
Slave cylinders are outside the bell housing and push a fork that holds the throw out bearing. They are 2 completely different set ups. Lt1s and turdgens had slave cylinders.
It's still a slave cylinder. Regardless of what you want to call it.
that's why it's called a hydraulic release bearing.
Slave cylinders are outside the bell housing and push a fork that holds the throw out bearing. They are 2 completely different set ups. Lt1s and turdgens had slave cylinders.
No they aren't...Master is at one end, slave is at the other. Get over it.
Ooohhh looky...we getting somewhere now. You actually know there's a master on one end. Work on distinguishing the differences on the other end now. Most get 1000 words from a pic. I guess you only get about 3.
Geez! Shake you dicks, this pissing match is over. I always refer to them as a slave cylinder because when I worked at autozone years ago that’s what the hydraulic release bearing was located under.... slave cylinders.
Geez! Shake you dicks, this pissing match is over. I always refer to them as a slave cylinder because when I worked at autozone years ago that’s what the hydraulic release bearing was located under.... slave cylinders.
Are you? I posted pics and all. A monkey could tell the difference.
Originally Posted by The0nlyon3
Geez! Shake you dicks, this pissing match is over. I always refer to them as a slave cylinder because when I worked at autozone years ago that’s what the hydraulic release bearing was located under.... slave cylinders.
Seems normal for auto parts employees to not know wtf they're talking about.
I agree... it’s essentially a hydraulic piston that moves in and out based on what the master cylinder does. By definition a brake caliper is also a slave cylinder in that it does what the brake master cylinder makes it do.
But it’s different because it’s called a brake caliper. Haha
I agree... it’s essentially a hydraulic piston that moves in and out based on what the master cylinder does. By definition a brake caliper is also a slave cylinder in that it does what the brake master cylinder makes it do.
But it’s different because it’s called a brake caliper. Haha
great ******* example of why they're different......from a auto parts store employee.
Forget that there is a bearing on one, one has no bearing and operates by pushing a fork on a bearing......and one it a goddamn brake caliper.
I mean you're a real genius dude. Keep up the good work.
12-26-2020, 05:08 PM
Weird eehh.
