Manual Transmission T56 | T5 | MN12 | Clutches | Hydraulics | Shifters

Grinding

Thread Tools
 
Search this Thread
 
Old 08-24-2004 | 06:57 AM
  #1  
Lunchbox01's Avatar
Thread Starter
Launching!
 
Joined: Aug 2004
Posts: 256
Likes: 0
From: Stationed at NAS Whidbey Island in Northwest WA.
Default Grinding

I have a 98 TA. It is perfect, except for grinding. Under normal conditions, I will grind from 4th to 5th or it will go in and pop out, or not go in at all... i need help The other part of grinding, is when the car is cold, it will grind into 4th... These are all under normal conditions, now on the track, it is fine, and if im hard on it it is fine... im confused... ... what do i do????? Please e-mail me christopher.salge@navy.mil or relply here.
Old 08-25-2004 | 12:30 AM
  #2  
ArcticZ28's Avatar
TECH Senior Member
20 Year Member
iTrader: (14)
 
Joined: Jun 2004
Posts: 5,125
Likes: 4
From: Alexandria, VA
Default

Bad syncro(s) most likely. Gotta get em checked out which means pulling the whole trans and takin it apart. And, on top of that, sometimes syncros look perfect and are completely bad. It's a lot of guessing even when you know what you're doing. I just had the same thing happen to me from 1st to 2nd. Replaced the syncros. We'll see how it turns out.




All times are GMT -5. The time now is 12:09 PM.