Ram 910/402 review

Reply Subscribe

Thread Tools

Search this Thread

Nov 20, 2004 | 05:28 PM

glennster

Thread Starter

11 Second Club

iTrader: (1)

Joined: Mar 2004

Posts: 800

Likes: 0

From: Illinois

Ram 910/402 review

I installed the ram stage 4 kit with the 910 disc today.Very impressive high quality clutch kit,I used a billet fly,new pilot,slave,master and did the drill mod.3 PP bolt holes line up the plate and do this with no side movement,nice.
Bleeding was no problem and release is 2" off the floor with no dissengagement problems,pedal is firm but not objectionable.Feels like a performance clutch now.Driveability is just awesome with NO chatter,it does have a small window of off-on but with the 4.10s I got the hang of takeoffs after a few stops.I have replaced a few defective specs [I didn't install them]and I wouldn't have one.Ram is a great choice for these cars and new era hooked me up for $389.00 shipped.

Nov 24, 2004 | 01:54 PM

Mooobunnny

11 Second Club

iTrader: (1)

Joined: Nov 2003

Posts: 301

Likes: 1

From: Greensboro, NC

I just ordered the same setup....some firiends have it to and absolutely love it!

Chris

Nov 26, 2004 | 02:04 AM

LSs1Power

TECH Addict

iTrader: (5)

Joined: Mar 2002

Posts: 2,320

Likes: 0

From: VA

How much power can this RAM holds?

Nov 26, 2004 | 06:14 AM

Fireball

TECH Senior Member

iTrader: (21)

Joined: Nov 2001

Posts: 8,484

Likes: 0

From: Cecil County Raceway!!!

Thats pretty much what I run...

Ram 910 disk + 402PP + Hayes SFI steel flywheel

I'm approaching 100 1/4 mile passes on that setup

Dec 4, 2004 | 05:29 PM

Mike @ New Era

Banned

iTrader: (10)

Joined: Mar 2004

Posts: 1,021

Likes: 1

That set up will hold about 600 rwhp , we have a lot of customers runnning that set up without any complaints . It is very streetable and can hold up to quite a bit of power .

Mike
www.neweraperformanceparts.com
sales@neweraperformanceparts.com
585-865-1932

Dec 4, 2004 | 10:46 PM

Lesrace82

TECH Regular

iTrader: (8)

Joined: Sep 2002

Posts: 482

Likes: 0

From: Byron, IL

How does it like Nitrous?

Dec 5, 2004 | 09:19 AM

Mike @ New Era

Banned

iTrader: (10)

Joined: Mar 2004

Posts: 1,021

Likes: 1

Same deal , it can be used with Nitrous up to 600 hp .

Mike
www.neweraperformanceparts.com
sales@neweraperformanceparts.com
585-865-1932

Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin

Verdad Gallardo

6 Common C5 Corvette Failures and What's Involved In Repairing Them

Pouria Savadkouei

Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph

Verdad Gallardo

Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked

Pouria Savadkouei

Top 10 Most Powerful Chevy Trucks Ever Made!

Hennessey's New Supercharged Silverado ZR2 Has 700 HP

Verdad Gallardo

Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes

Verdad Gallardo

Awesome K5 Blazer Restomod Comes With C7 Corvette Power

Verdad Gallardo

10 Camaros You Should Never Buy

10 LS Engine Myths That Refuse to Die

Verdad Gallardo

Dec 11, 2004 | 10:45 PM

ChevyWeatherman

master of the "jack"stand

iTrader: (2)

Joined: Nov 2001

Posts: 815

Likes: 0

From: Volo, IL

Yes I am also VERY interested in this setup. Can I use the stock master and slave?

Dec 11, 2004 | 11:49 PM

#10

Mooobunnny

11 Second Club

iTrader: (1)

Joined: Nov 2003

Posts: 301

Likes: 1

From: Greensboro, NC

Quote:

Originally Posted by ChevyWeatherman

Yes I am also VERY interested in this setup. Can I use the stock master and slave?

According to RAM you need an adjustable master, but stock slave is fine, but I would recommend an 01' + slave

Dec 12, 2004 | 02:36 AM

#11

00Z-28Maro

On The Tree

iTrader: (1)

Joined: Dec 2003

Posts: 163

Likes: 0

From: Washington, DC.

I think I am also getting this setup or one very similar. Hope it's as good as it sounds.

Dec 12, 2004 | 03:37 PM

#12

glennster

Thread Starter

11 Second Club

iTrader: (1)

Joined: Mar 2004

Posts: 800

Likes: 0

From: Illinois

I used updated hydro's with no problem.

Dec 12, 2004 | 03:55 PM

#13

Squintz Palladoris

11 Second Club

iTrader: (1)

Joined: Sep 2003

Posts: 1,252

Likes: 0

From: Fayettenam, North Cakalki

Quote:

Originally Posted by 00Z-28Maro

I think I am also getting this setup or one very similar. Hope it's as good as it sounds.

Thats exactly what you are gettin

Brad

Dec 12, 2004 | 05:25 PM

#14

00Z-28Maro

On The Tree

iTrader: (1)

Joined: Dec 2003

Posts: 163

Likes: 0

From: Washington, DC.

Thanks for clearin that up Brad... P.S. I ordered those parts Saturday.

Kirk

Dec 12, 2004 | 06:01 PM

#15

glennster

Thread Starter

11 Second Club

iTrader: (1)

Joined: Mar 2004

Posts: 800

Likes: 0

From: Illinois

I have a few hundred miles on it now and as it breaks in it gets harder to drive on the street.It grabs like a monster and 3.42 guys may have some trouble.The window of on-off is real small but still manageable.