P Mack

iTrader: (6)

Hmm, maybe it's not the clutch, but I don't see what else it could be cause it worked perfect when i put the stock one back in. Is there something i can measure on the pressure plate to be sure?

m6z

iTrader: (5)

I Just Installed A Ram Powergrip Stage 4 W/ram Flywheel. Stock Master W/drill Mod & Updated Slave. Didnt Bench Blead The Master, But Pressure Blead The System. Drove Around For A Day, The Disengagement Was Right At The Floor. Blead It The Next Day And Relase Point Is Now Perfect. Just My Experance, Btw I Purched My Clutch & Flywheel From Newera Performance.

OH YA, THERE WASNT ANY SHIMS WITH THE KIT