wlz28

I was drivin around the other day and I put the tranny outa gear while rolling to a stopsign. when I pushed the pedal down to go to first it just fell to the floor. I rech down, pulled the pedal up and it stayed up. Worked fine afterwards why would it suddenly fall like that and then fix itself?

wrencher

iTrader: (2)

Typical hydraulic issues, you are likely gonna need to get a master. Do a search, has your pedal been mushy, after hard driving the pedal sticky? Stock clutch in there? Might wanna prepare to do it all up & get it over with.

wlz28

just got the 6-sp. in. Haven't had a chance to drive it hard and it has a spec stage 3

wrencher

iTrader: (2)

Hows the pedal deel now, solid or spongy a bit?

0formula1

iTrader: (1)

i have a problem just like that when driving hard the pedal sticks to the floor and it wont go into gear. got any ideas for me?????

wlz28

The pedal feels fine I guess. I really can't compare it to anything. I'll have to get in my buddies TA and compare how they feel

SLOC5LS6

do you remember what the issue turned out to be?

Mini's00TA

could it be the slave cylinder by any chance?