Need Help Quick!!! Clutch install

Reply Subscribe

Thread Tools

Search this Thread

Mar 30, 2006 | 05:25 PM

01SSRMS

Thread Starter

12 Second Club

iTrader: (7)

Joined: Nov 2004

Posts: 271

Likes: 0

From: Nashville, TN

Need Help Quick!!! Clutch install

Got it together, 11pm and headed home. Would have been 9pm and going home if not for the lack of a clutch alignment tool and hunting down a 13mm 12 point for the ARP flywheel bolts. Thanks for the tips. LS1tech rocks as always when you need good info.

Last edited by 01SSRMS; Mar 30, 2006 at 11:05 PM.

Mar 30, 2006 | 05:37 PM

01SSRMS

Thread Starter

12 Second Club

iTrader: (7)

Joined: Nov 2004

Posts: 271

Likes: 0

From: Nashville, TN

Ah, guide pins are seized up pretty good.

Mar 30, 2006 | 05:39 PM

LS1TORQ

TECH Apprentice

iTrader: (1)

Joined: Apr 2005

Posts: 317

Likes: 0

From: Tempe, Arizona

the bellhousing has two studs on the left and right hand side, they're pretty thick and about 1/4" long. It took me abit of prying in various locations with a big screwdriver as well as a little assisstance from a rubber mallet. Just work it around keeping in mind there are alignment studs.

Mar 30, 2006 | 06:01 PM

White.Lightning

TECH Addict

iTrader: (53)

Joined: Mar 2005

Posts: 2,863

Likes: 1

From: Aston, PA

Pry on the passenger side, near bottom, there is a tab.

Andy

Mar 30, 2006 | 06:11 PM

purple98haz28

TECH Enthusiast

iTrader: (5)

Joined: Oct 2005

Posts: 525

Likes: 0

From: Sulphur, LA

pry,pry and pry again it will come

Mar 30, 2006 | 06:19 PM

XtrmLS1spd

Banned

iTrader: (6)

Joined: Jun 2003

Posts: 249

Likes: 0

From: Louisville, KY

Where are you in Lexington? Shoot me a pm if you would like some help getting that out. AutoZone has the puller that you will need if you do not yet have one.

Mar 30, 2006 | 06:29 PM

01SSRMS

Thread Starter

12 Second Club

iTrader: (7)

Joined: Nov 2004

Posts: 271

Likes: 0

From: Nashville, TN

Sent you a PM Xtrm. We're at the Audi dealership in Hamburg. someone is in route to get the puller. Feel free to swing by, would be cool to have you here.