View Poll Results: What Clutch are You Using? (select one or more)
LS1 (Stock)
341
21.05%
LS6
152
9.38%
LS7
182
11.23%
Textralia OZ700
115
7.10%
Textralia Exo-Skel
36
2.22%
SPEC 1
18
1.11%
SPEC 2
45
2.78%
SPEC 2+
33
2.04%
SPEC 3
192
11.85%
SPEC 3+
108
6.67%
SPEC 4
23
1.42%
SPEC 5
26
1.60%
McLeod Single Disc
41
2.53%
McLeod Twin Disc
78
4.81%
Ram VDS 300
4
0.25%
Ram VDS 900
4
0.25%
Ram VDS 980
6
0.37%
Ram VDS 910 "Race"
10
0.62%
Ram HDX
6
0.37%
Ram Powergrip
21
1.30%
Ram Powergrip HD
87
5.37%
Exedy Hyper Single Disc
5
0.31%
Exedy Twin Disc
14
0.86%
Centerforce Dual Friction
132
8.15%
Hays
4
0.25%
SLP/LS6
17
1.05%
ZOOM
12
0.74%
Luk Pro Gold
20
1.23%
Multiple Choice Poll. Voters: 1620. You may not vote on this poll
What Clutch is Everyone Using?
i had a spec stage 3 in my old SS and loved it, it held up great and had the same pedal feel as a stock clutch.
i just ordered an ls7 clutch for my formula and am having it installed at the moment so no reviews yet but its basically a oem clutch anyways so i dont expect any problems
i just ordered an ls7 clutch for my formula and am having it installed at the moment so no reviews yet but its basically a oem clutch anyways so i dont expect any problems
I've got a RAM Powergrip HD and it grabs HARD and doesn't let go.
Before that I had a Spec II which just glazed itself over after 11K. Plenty of friction material left, just glazed over on 330rwtq...
Centerforce here...installed billet steel flywheel at the same time.
Chatters at engament and holds ok but all I have for now is bolt ons...Im afraid I may have to swap it after my H/C install.
Chatters at engament and holds ok but all I have for now is bolt ons...Im afraid I may have to swap it after my H/C install.
Lots of sponsors sell the LS7 clutch. I bought mine from SDparts.com. In my experience it took nearly 2 weeks and the order was missing a part. But with a phone call they cleared it up.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
On The Tree
Joined: Jun 2006
Posts: 142
Likes: 0
From: Southeastern, PA
I got the LS7 kit installed with new master and updated slave. Worked awesome for the first 12,000 miles but now I'm having disengagment problems after any two consecutive gear WOT. I have DOT4 fluid and regularly change the fluid. At first I thought this was a hydraulic issue, but now I'm learning that many people that have the LS7 clutch are describing the exact same issues I'm having after about 10k miles. They're saying it's an issue with the pressure plate at high RPMs. I've read several threads on this at Z06vette forum and corvette forum. Anybody else experience or hear of this yet?
textralia exo for the street/stip works great after a summer of use cant wait for this snow to melt! Durring break in the first 40 or so miles i did seem to chirp the tires on take off (or stalled) lol.
It might be time to start a new thread with all the new clutches that have come out since then.
TECH Regular
Joined: Dec 2006
Posts: 417
Likes: 1
From: Canada
i was planning on useing a spec 3+ but it seems very up and down, and i want some thing that will hadnle ym motor with out me having to change after evert trip to the gas station
has they quailty improved over time so far?
has they quailty improved over time so far?
