Manual Transmission T56 | T5 | MN12 | Clutches | Hydraulics | Shifters

Z06 Flywheel question

Thread Tools
 
Search this Thread
 
Old 04-12-2002 | 11:55 AM
  #1  
BLKWS64ME's Avatar
Thread Starter
Teching In
 
Joined: Apr 2002
Posts: 42
Likes: 0
From: Korea
Default Z06 Flywheel question

I bought a 02 Z06 clutch and flywheel right before I went to Korea. I need to know how light the flywheel is and how much better it is from my 98 WS6. And also if it is lighter than the 12lb flywheels that are aftermarket. Thanx
Old 04-12-2002 | 12:17 PM
  #2  
NastySSoo's Avatar
TECH Fanatic
 
Joined: Jan 2002
Posts: 1,376
Likes: 0
From: Stuart Fl
Default Re: Z06 Flywheel question

I have a 00SS. Ireplaced my clutch last year with a 01 Z06 clutch. Pressure plate part# was the different, but flywheel # was the same. (# stamped on the flywheel). Just replaced it again this year with a02 Z06 clutch. Once again the pressure plate # was different, but the flywheel # was the same. Bottom line, 00 LS1 flywheel , 01 Zo6 flywheel, and 02 Z06 flywheel are all the same. BTW the 02 set-up hits hard as hell!!

Paul
Old 04-12-2002 | 12:26 PM
  #3  
BLKWS64ME's Avatar
Thread Starter
Teching In
 
Joined: Apr 2002
Posts: 42
Likes: 0
From: Korea
Default Re: Z06 Flywheel question

Thanx for answering my question. I have to wait till June 20 when I go on my midtour from Korea to the Florida for 30 days. Then its back to Osan for another 5 and a half months till I go to my next base, hopefully Germany(so I can show those German cars what we can do).




All times are GMT -5. The time now is 08:46 AM.