Clutch is Rock hard
09-26-2006, 07:59 PM
#1
On The Tree
Thread Starter
iTrader: (6)
Join Date: Apr 2005
Location: The Berlin Turnpike
Posts: 148
Likes: 0
Received 0 Likes
on
0 Posts
Clutch is Rock hard Just installed Ram clutch with new slave and master. I used the shim with the clutch. I did the drill mod and made sure that the line was free of debris after.
I've got the thing all back together and I'm trying to bleed it using the mityvac while someone pumps the clutch in and out slowly method and the clutch is rock hard can't move it.
Any ideas?
I've got the thing all back together and I'm trying to bleed it using the mityvac while someone pumps the clutch in and out slowly method and the clutch is rock hard can't move it.
Any ideas?
