extra hole in the flywheel orientated with the extra hole in the crank?
08-22-2002 | 07:18 PM
#1
Thread Starter
7 Second Club
iTrader: (11)
Joined: Jul 2002
Posts: 8,758
Likes: 9
From: Port Tobacco, MD
extra hole in the flywheel orientated with the extra hole in the crank? There is an extra hole in the flywheel and an extra hole in the crank. Should these always be orientated together?
Phillip
Phillip
08-22-2002 | 07:35 PM
#2
TECH Resident
Joined: May 2002
Posts: 829
Likes: 0
From: Fremont, CA
Re: extra hole in the flywheel orientated with the extra hole in the crank? Last time i replace my clutch assembly.. i made sure the holes were aligned... dunno if its required.. but it would make sense.
