Manual Transmission T56 | T5 | MN12 | Clutches | Hydraulics | Shifters

Reccomend me a clutch!

Thread Tools
 
Search this Thread
 
Old 05-23-2007 | 03:27 PM
  #1  
cr0y's Avatar
Thread Starter
Staging Lane
 
Joined: Apr 2005
Posts: 59
Likes: 0
From: Pittsburgh, PA
Default Reccomend me a clutch!

I just got done doing a lot of work on my 99 Z28, the current clutch is what I think to be the factory original and has about 80,000 miles on it. I figured I would budget a new/upgraded clutch but I am not familiar with what is a good clutch these days for this car.

The car is a strict daily driver and is doing around 380rwhp. I am not sure what else is relevant information so if I am missing something please just ask me and I will fill in the blanks.
Old 05-23-2007 | 03:42 PM
  #2  
rk_2000_Z/28's Avatar
TECH Resident

iTrader: (3)
 
Joined: May 2006
Posts: 827
Likes: 0
From: Enid, OK
Default

I have the Textralia OZ700 and I really like it. It feels so much like the stock clutch, and seems to be holding the power just fine (although I'm not making that much over stock anyways)

I also had a Spec3 in my old Z/28, and I liked that one also. The pedal is a little 'lighter' feeling and seems to engage a little quicker. I can honestly say I never killed my car one time after the swap, but it did take some getting used to. It was nothing one night of driving around couldn't cure though.

GMHTP did a big article about the OZ700 and really gave it high praise.
Old 05-23-2007 | 07:59 PM
  #3  
teke184's Avatar
TECH Junkie
iTrader: (5)
 
Joined: Feb 2007
Posts: 3,183
Likes: 2
From: Key West, Florida
Default

spec 2 or 3 should do you just fine
Old 05-23-2007 | 09:23 PM
  #4  
1998z28ss's Avatar
Launching!
 
Joined: Feb 2006
Posts: 264
Likes: 0
From: Cabot Arkansas
Default

RAM HD powergrip if you can handle a heavy pedal. Best bang for the buck.




All times are GMT -5. The time now is 08:45 AM.