Mcleod street twin guys
05-27-2007, 02:18 PM
#1
TECH Veteran
Thread Starter
iTrader: (12)
Join Date: Dec 2004
Location: Rockville, MD
Posts: 4,354
Likes: 0
Received 0 Likes
on
0 Posts
Mcleod street twin guys got the clutch but no instructions. whats the pressure plate torque specs and floater plate torque specs? also, how is it on the track?
05-27-2007, 04:27 PM
#2
TECH Regular
Join Date: Jan 2007
Location: boostville
Posts: 408
Likes: 0
Received 0 Likes
on
0 Posts
here you go, this should give you all the information you need.
http://www.mcleodind.com/faq.html#top_questions
pay special attention to the way the discs face and especially the alignment markings on the FW,PP & IP.
http://www.mcleodind.com/faq.html#top_questions
pay special attention to the way the discs face and especially the alignment markings on the FW,PP & IP.
05-29-2007, 01:34 AM
#5
TECH Veteran
Thread Starter
iTrader: (12)
Join Date: Dec 2004
Location: Rockville, MD
Posts: 4,354
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by alwaysinboost
no problem.
good luck on your quest for 10s, I have a feeling you're going to need a new sn soon.
good luck on your quest for 10s, I have a feeling you're going to need a new sn soon.
anyways, are the alignment markings in the metal or are they inked on.
05-29-2007, 06:54 AM
#6
TECH Regular
Join Date: Jan 2007
Location: boostville
Posts: 408
Likes: 0
Received 0 Likes
on
0 Posts
The FW and intermediate plate both have 2 punch marks showing their alignment. See below:
The alignment marking on the PP also has a black strip, you can see it @ the 12 o'clock position in the pic below.
The alignment marking on the PP also has a black strip, you can see it @ the 12 o'clock position in the pic below.
Originally Posted by Wnts2Go10O
clutch is going dads car. mines got an l92 headed 6.0
anyways, are the alignment markings in the metal or are they inked on.
anyways, are the alignment markings in the metal or are they inked on.
