Best Driveshaft loop with LT's?
Thread Starter
TECH Senior Member
iTrader: (9)
Joined: Dec 2001
Posts: 5,395
Likes: 1
From: Estero, FL
Best Driveshaft loop with LT's? I need to get a driveshaft loop in my car PRONTO. But when I was under it the other day I noticed that my FLP Y pipe might be in the way.
Does anyone have any suggestions as to what the best driveshaft loop is?
TIA!
Does anyone have any suggestions as to what the best driveshaft loop is?
TIA!
TECH Senior Member
Joined: Nov 2001
Posts: 7,036
Likes: 1
From: Lake Zurich, IL
Re: Best Driveshaft loop with LT's? If the lakewood fits w/no adjustments that'd prolly be your best bet.
I have a BMR DSL on my car w/the FLP Y-Pipe, just had to put some spacers on the brace so it didn't hit the Y-Pipe.
I have a BMR DSL on my car w/the FLP Y-Pipe, just had to put some spacers on the brace so it didn't hit the Y-Pipe.
Re: Best Driveshaft loop with LT's? Jegs. I have one that rubs the hell outta either the TA or the Exhaust and sets mad KR. So, now it lays in the garage somewhere and collects spiderwebs.
TECH Fanatic
Joined: Nov 2001
Posts: 1,780
Likes: 7
From: Mi./Al.
Re: Best Driveshaft loop with LT's? I can't say what works on FLP's but with SLP's there loop works fine, all you'll need is about four flat washers per bolt. You'll also probably need longer bolts, I think there 8mm fine thread.
Al
Al
Re: Best Driveshaft loop with LT's? I'm also using the Lakewood with my LT's, custom Y-pipe, and G2 TA. It fits fine and has a decent amount of adjustment. The best thing about is that it goes over the top of the exhaust so you lose no ground clearance either. Got mine from Jegs as well. I have a couple of pics I can email you if you want - just let me know.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Re: Best Driveshaft loop with LT's? I have no idea why any sponsors here dont stock the Lakewood loop, it is the only d/s loop that I ever tried that doesnt require beating, grinding or welding to work. Mine has cleared MACs and a custom 3" Y/flowmaster collector, LPE driveshaft and RT torque arm with no problems..
It will not work with the stock manifolds y-pipe though, since it goes above the exh the stock stuff is tucked up too high..
It will not work with the stock manifolds y-pipe though, since it goes above the exh the stock stuff is tucked up too high..
TECH Addict
Joined: Nov 2001
Posts: 2,662
Likes: 1
From: LaConner WA
Re: Best Driveshaft loop with LT's? That slow POS of yours don't need no safety loop ! If I were you I'd run a plastic DS. It'd be plenty strong enough for your power level + if it broke it wouldn't hurt anything 
