3rd Gear grinds... what do I need?
#1
Staging Lane
Thread Starter
Join Date: Jun 2007
Location: Omaha, NE
Posts: 69
Likes: 0
Received 0 Likes
on
0 Posts
3rd Gear grinds... what do I need?
Ok I already had a rebuild on my trans only 6k ago. Carbon blocker rings, billet dog keys, 3-4 steel shift fork, bronze fork pads
Well due to bad hydraulics and a terrible attempt at a burnout, I think 3rd gear synchro gave up the ghost. I can bang 1-2 fine, 3-4 fine, but 2-3 grinds at any RPM in which i shift "quickly". Driving normal its fine.
If thats all thats wrong with the trans, what parts do I need to fix this problem? I'd probably purchase parts from sixspeedsinc, so if one of you folks could chime in, that'd be great.
Well due to bad hydraulics and a terrible attempt at a burnout, I think 3rd gear synchro gave up the ghost. I can bang 1-2 fine, 3-4 fine, but 2-3 grinds at any RPM in which i shift "quickly". Driving normal its fine.
If thats all thats wrong with the trans, what parts do I need to fix this problem? I'd probably purchase parts from sixspeedsinc, so if one of you folks could chime in, that'd be great.