L92 LS3 heads, valve job, PAC 1519 springs, rockers, valve covers
For SaleEngine - Internals
04-24-2019, 09:23 AM | Replies: 15 | Views: 3594
-
Price
$900
- Location Pittsburgh, PA, 15135, USA
- Condition Used
Description:
I have a set of heads L92 reman'd heads. Work done by experience machine shop that has done hundreds of heads for us. 823 casting L92 heads (same casting and valve size as LS3) decked for flatness, 3 angle valve job, new valve seals, and PAC 1519 springs. Springs have 20k miles. Stainless exhaust studs installed. One intake manifold bolt was crossthreaded so they installed a threaded plug and retapped the hole. You cannot see it with intake installed. It is a nice professional repair done on a vertical mill.
$900 OBO for the heads
Also available:
ARP head bolts - $100 obo
Hardened pushrods + Morel lifters, trays, hardware - make offer
Valve covers - make offer
Last edited by FastKat; 06-06-2019 at 08:22 AM.
#5
Hi Tom,
I believe the heads were milled in the neighborhood of .005"-.010" which is very little. The pushrods are the correct length - I measured with a Comp pushrod length checker (because I thought I would need shorter pushrods because of the heads) but it was dead on for the stock length.
I believe the heads were milled in the neighborhood of .005"-.010" which is very little. The pushrods are the correct length - I measured with a Comp pushrod length checker (because I thought I would need shorter pushrods because of the heads) but it was dead on for the stock length.