Description:

Located between: Cincinnati/Dayton Ohio.

I want to say this is the cleanest F-Body I've ever owned and one the best I've seen in person ever. I really want this to go to a good home. In all honesty this car could just be turned into a show car or put 315s on all four and autocross/road race (my original plan).

I have all documentation!! Window sticker, built sheet, original catalog booklet, all receipts. Even organized wiring diagrams and torque spec sheets!

All the engine work, Dyno tuning etc. were done by CRT Performance by the first owner.
All the suspension and brake work were done by me (still kept all the purchase receipts).

The last Dyno was in 2015 and the car put down 444 HP on a Mustang Dyno.

When you look through the paperwork for this car your actually see the history of the build. The original owner even printed pictures and grouped his ideas as he made decisions for the car.

The car also comes with most of the original stock parts minus heads and LS6 intake.

Please let me know if you have any questions and thanks for looking.

Stock Options -Preferred Equipment Group

-T-Tops

-12 Disc CD Change

-Leather Seats

-Stock T-Top Shades

-Traction Control

Engine

-PRC 225cc Cathedral heads milled to 58cc

-Manley 2.065 Custom Intake Valve

- Ferrea 1.60 Exhaust Valve

-PRC .650" Dual Spring

-PRC Titanium retainer

-TSP LS6 Ported Oil Pump

-Comp Cams LSx Rocker Arm Trunion Upgrade

-Cloyes Race Billet Double Roller Timing Set

-Vengeance Racing VRX3 Camshaft

-Comp 5/16 7.400 Hardened Pushrods

-ARP Hardware Used on Entire Top-End Build

-New Crank Bolt

-80mm LS6 MAF

-FAST 102mm Intake

-102mm Nick Williams Throttle Body

-Fast Fuel Rails W/ 28.8 lb. Injectors

-MSD Red Plug Wires

Exhaust/CAI

-American Racing Stainless Long tubes

-American Racing Catted Y-Pipe

-GMMG Cat-Back

-ARP Stage 8 Locking Header Bolts

-Volant Cold Air Intake System

Suspension

-Koni Yellows SA 4/3

-BMR SP001 Lowering Springs

-UMI T/A Relocation Crossmember

-Energy Suspension T/A Bushing

-UMI Rear LCA Poly/Roto-Joint

-UMI Panhard Poly/Roto-Joint

-UMI Front and Rear Sway Bars

-Sam Strano Brake Master Cylinder Brace

-Moog Replacement Strut Bearing Plate, Coil Spring Seat and Strut Mount

Rear End

-TA Rear Girdle

-Motive 3.73 Gear Set

-Moser 28 Spline Axle Update

-Moser Axle Bearings and Seat Kit

-ARP Rear Wheel Studs

Wheels/Tires/Brakes

-OE Wheels 18x9.5 C5 DD

-Sumitomo HTR Z5 275/35R18 (Less then 1k miles)

-6th Gen Front 4 Piston Front Calipers

-KNS C7 Z51 Rotors

-Stock Pads

-Kore3 Stainless Braided Brake Lines (Blue)

Interior/Exterior Upgrades

-SS Floor Mats

-LED Light Upgrades

-Hawks Short Throw Shifter W/Isolator Cup

-Hawks Billet Blue Engraved SS ****

-2 AeroForce Interceptor Gauges

-Autometer Pro Shift Light

-Kee Audio CDT Speaker Upgrade

-6LE Carbon Fiber SS Grille

-Black Berger Panel (Have Stock Pewter)

-Emblem Pros Stainless Camaro Insert