ls7 intake,manton pushrods,new moog front shock bearing
For SaleEngine - Internals
01-28-2021, 11:15 AM | Replies: 12 | Views: 2606
-
Price
$10• OBO
- Location Reading, PA, 19601, USA
- Condition Used
Description:
new moog front shock bearings, i think thats what they are called, for 4th gens, free if you pay shipping
LS7 intake $110 shipped
2 sets of manton 3/8 rods, .120 wall, all basically different lengths but both sets range roughly in the 7.98 to 8.050 range. make an offer. most of them have contact marks from hitting the head but they are cosmetic only not gouges
Last edited by Floorman279; 02-02-2022 at 12:32 PM.
Reply
#6
pushrods
all prices please add 3% or paypal gift
cam from a motor i bought, cam card is in the pics below.....low run time, was told by a knowledgeable person this cam would want more than stock compression. SOLD!!!!!
new gm crank position sensor for all 24 tooth wheels, 15 shipped
moroso crank sprocket for ls cranks, comes with matching 10 inch degree wheel. SOLD!!!!!!
KW adjustable height rear lowering springs for 4th gen fbodies, fits stock 10 bolts only which is why i am selling, SOLD!!!!!
new moog front shock bearings, i think thats what they are called, for 4th gens, free if you pay shipping
2 comp pushrod length checkers, SOLD!!!!!!!
Chrs1313 ram air for fbodies, beat up from multiple install/uninstalls. non ac version, not the best of shape but still functional SOLD!!!!
LS7 intake, low miles, good shape just like 99% of other ls7 intakes, $160 shipped
nick williams 90mm throttle.SOLD!!!!!
lingenfelter 100 mm maf, uses a gm maf card, SOLD!!!!!
factory centerbolt valve covers from my 2000 camaro. they come with the the thick gaskets to help clear aftermarket rockers, i removed all interior baffling from the pass side as well as grinded away the ridges to clear the YT aluminum rockers. also comes with the catch can fitting to pull from the valve cover for PCV system. if this is not desired i can include a mobile 1 style cap thats in almost perfect shape. i would want $100 shipped with gaskets but wanna keep these until i find a buyer for the rockers in the event he/she wants the thick gasket.
2 sets of manton 3/8 rods, .120 wall, all basically different lengths but both sets range roughly in the 7.98 to 8.050 range. make an offer. most of them have contact marks from hitting the head but they are cosmetic only not gouges
deatschwerks ls3/ls7 injectors, 42pounds at 43psi SOLD!!!!!
Yella terra ls7 rockers, 1.8 ratio, stock 8mm bolts, ordered for trick flow heads but cant imagine why they cant be used on other heads since they use individual stands. please do research before ordering to see if these will work in other heads. 500 miles, all in great shape, all wheels are flawless $350 shipped
cam from a motor i bought, cam card is in the pics below.....low run time, was told by a knowledgeable person this cam would want more than stock compression. SOLD!!!!!
new gm crank position sensor for all 24 tooth wheels, 15 shipped
moroso crank sprocket for ls cranks, comes with matching 10 inch degree wheel. SOLD!!!!!!
KW adjustable height rear lowering springs for 4th gen fbodies, fits stock 10 bolts only which is why i am selling, SOLD!!!!!
new moog front shock bearings, i think thats what they are called, for 4th gens, free if you pay shipping
2 comp pushrod length checkers, SOLD!!!!!!!
Chrs1313 ram air for fbodies, beat up from multiple install/uninstalls. non ac version, not the best of shape but still functional SOLD!!!!
LS7 intake, low miles, good shape just like 99% of other ls7 intakes, $160 shipped
nick williams 90mm throttle.SOLD!!!!!
lingenfelter 100 mm maf, uses a gm maf card, SOLD!!!!!
factory centerbolt valve covers from my 2000 camaro. they come with the the thick gaskets to help clear aftermarket rockers, i removed all interior baffling from the pass side as well as grinded away the ridges to clear the YT aluminum rockers. also comes with the catch can fitting to pull from the valve cover for PCV system. if this is not desired i can include a mobile 1 style cap thats in almost perfect shape. i would want $100 shipped with gaskets but wanna keep these until i find a buyer for the rockers in the event he/she wants the thick gasket.
2 sets of manton 3/8 rods, .120 wall, all basically different lengths but both sets range roughly in the 7.98 to 8.050 range. make an offer. most of them have contact marks from hitting the head but they are cosmetic only not gouges
deatschwerks ls3/ls7 injectors, 42pounds at 43psi SOLD!!!!!
Yella terra ls7 rockers, 1.8 ratio, stock 8mm bolts, ordered for trick flow heads but cant imagine why they cant be used on other heads since they use individual stands. please do research before ordering to see if these will work in other heads. 500 miles, all in great shape, all wheels are flawless $350 shipped
Trending Topics
#12
ModSquad
iTrader: (6)
Are the pushrods engraved with lengths by chance? Manton offers this for like $30-$40.