ERL 427 Superdeck
For SaleEngine - Complete
-
Price
$7,000• Trade
- Location Rochester, NY, 14623, USA
- Condition Used
Description:
ERL 427 Superdeck engine. This is not your average resleeved LS motor. ERL Superdeck engines utilize an internal truss system for increased strength and rigidity along with very thick .250” wall sleeves. This was almost $20k short block new. Includes timing cover, rear cover, ICT billet valley cover, and ARP 1/2” heads studs. C6 Z06 oil pan/pump and ATI damper available separately.
-ERL Superdeck 4-bolt block (GM LSA block)
-Callies Magnum crank
-Callies Ultra billet rods
-Wiesco custom forged pistons (-20cc dish)
-ICT billet valley cover
-Custom turbo grind cam
The short block has approximately 4K miles on it and in good shape. Compression check done prior to removal. Was in a C6 Z06 Corvette. Have videos of the engine running with oil pressure readings for buyer. Cold start oil pressure around 65 psi. Hot idle oil pressure around 50 psi. Wide open throttle redline over 95 psi . Ideally, the motor could use a hone of the cylinder walls. Minor marks but unable to pick up with a fingernail. Priced accordingly.
Located in Rochester, NY. Delivery available on the east coast and midwest.
$7950 Lowered to $7000 and now including the oil pan and ATI super damper.
Trending Topics
The Best V8 Stories One Small Block at Time
also have a 430Cu LS6 24x, i have ported heads, don't recall the casting offhand
is your engine 24 or 58xx?











