chpmnsws6

iTrader: (70)

to the nitrous guys, where do you get your bottles filled? does anyone know a place to rent/buy mother bottles? if i can't find cheap nitrous, it might be time to have my own station. where does everyone hang out here? I'm in Lima Ohio and looking for people to hang out with.

post up guys!

koolrayz

iTrader: (26)

Go to any large gas house and rent a big bottle. buy a cheap bathroom scale. a couple of bottle nuts and a hose. you can do the freeze and fill for next to nothing.

98redorangeta

iTrader: (10)

I know of a few places one in kettering one in bevercreek and jegs in columbus but none of those are to close to lima but i live in dayton so i dont know a lot of places near lima.

DarkFormula

iTrader: (80)

You're somewhat close to Marysville. Lots of us around the area or have friends there.

MetallicaMatt

iTrader: (19)

i'm living in Troy right now

but FYI, at home (sandusky) i haven't beenable to find a place that will sell me the gas b/c of liablity with huffing the gas, etc

said i had to be licensed...bastards

chpmnsws6

iTrader: (70)

i heard about Jegs but at 5 a pound, they can keep it!

i might have to try the freeze and fill method for awhile, or pick up a used station

chpmnsws6

iTrader: (70)

maybe they don't relize the sulfur will make you sick LONG before the nitrous will get you high. the shop tested a DP kit in the shop once...... and never again haha


man i can't wait to meet up with ya'll!

98redorangeta

iTrader: (10)

yeah jegs is expensive but its closer than the other shops i mentioned at least to you. If your out this way those other shops are only $3 a pound pm me if you are gunna head out his way i can give you some directions to those shops.

BlackLS199

Hey chpmnsws6 you wouldn't happen to go to school in Lima would ya??

chpmnsws6

iTrader: (70)

you guessed it! all i've seen over here is a "355 jasper ls1 engine" and a kid with a ws6 on Z06 rims.... but has the turn up tips *shakes head* maybe one day i can convince him to cut the turn-up parts off at his work.

you go there?

MetallicaMatt

iTrader: (19)

I know, I told them I don't need the medicial grade stuff (it was at welding supply shop) and they sad no way....ugh

98redorangeta

iTrader: (10)

chpmnsws6 did you just sign up on www.dayton-fbody.com?

chpmnsws6

iTrader: (70)

yup! sadly my first post is a FS thread..... not much in that site right now?

gillbot

iTrader: (27)

Sadly, Regional boards aren't as busy as a site like this. Give it time though, when the weather breaks the activity will increase.

chpmnsws6

iTrader: (70)

can't wait! will there be details on get togethers and such?

98redorangeta

iTrader: (10)

yeah there is one comming up check it out
http://www.dayton-fbody.com/DFBAbb/viewtopic.php?t=1250

nbm00ws6

iTrader: (4)

On Daytonfbody look up a member called 2qwk4u his name is Bill and he runs Brat Motorsports and can set you guys up with nitrous. He did have a shop just north of Dayton but he built a new shop close to the house and I'm not sure where it is. Tell him Tom sent you.
Tom

SilverFox_SS

hey chpmnsws6 if u see a loud silver ss w/ a black stripe down it and black rims stop me im in lima too and always looking 4 othern f bodys to cruse with as 4 no2 try valley gass (welding shop ) on rob ave im all motor 4 now but prob goma put in a shot soon so let me know what u find out

chpmnsws6

iTrader: (70)

HMMMMM is your car here? i think i've seen it! if so, looked good.

Saw another stout silver Z ls1 rollin around earlier and the red ws6 on Z06 rims.... but that kid blew me off when i tried asking him about his car :rollseyes:

DarkFormula

iTrader: (80)

CR's pretty busy for a regional board

I need to go to Lima to test drive some tanks at that plant out there...