Michigan Members
Thread Starter
Launching!
Joined: Mar 2005
Posts: 274
Likes: 0
Michigan Members Its getting pretty nice out, anyone been down to Woodward or Gratiot yet?
people with cammed cars- Im cammin my SS soon, what cam do you have and who tuned it? I need as much help as i can get.
Thanks, Mike
people with cammed cars- Im cammin my SS soon, what cam do you have and who tuned it? I need as much help as i can get.
Thanks, Mike
By the way, LSM Engineering can do a custom cam for ya. They are in Waterford, awesome guys to work with. One of the guys that works there was running a cam/exhaust only LS1 and I think he was hitting near 12 flats on motor, well in the 11's on the bottle.
Staging Lane
Joined: Sep 2006
Posts: 86
Likes: 0
From: Michigan
Originally Posted by 00PewterSS
Where you live? I just put a Torquer v2 112 in last week and don't have it tuned yet. It runs strong w/o a tune, so I may live w/o one for a bit.
Brian
Brian
I grew up and my family lives in Davison. Never seen your car, everyone owns a Lesabre and a Pickup in Davison. Yeah, if you want to hear a v2 sometime let me know, it pulls harder mid to limiter now. IMO it feels like it has as much HP at 5K rpm as it did before at redline. It will spin hard going into 2nd now vs a solid chirp and now will spin a bit shifting to 3rd.
Brian
Brian
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
I live 6 houses from woodward in Ferndale....needless to say, I'll be out there about everyday as soon as the textralia install is complete. Cops are worst in Birmingham, but watch the south bound tunnel under 696...they sit there everyday.
Gratiot/Crashit, sucks. Kids in Daddy's sclade, wearing so much cologne I can smell it from my car, and never paying attention!
Gratiot/Crashit, sucks. Kids in Daddy's sclade, wearing so much cologne I can smell it from my car, and never paying attention!
Almont here, bout 20 minutes from Davison. So whats goin on saturday night in Flint? Lot of people expected? I may cruise by in my truck(cars in pieces in Imlay City). Let me know, I'm always looking for other Fbody guys in the area.
Teching In
Joined: Mar 2007
Posts: 42
Likes: 0
From: Auburn Hills, Michigan
Originally Posted by 94strokedz
Almont here, bout 20 minutes from Davison. So whats goin on saturday night in Flint? Lot of people expected? I may cruise by in my truck(cars in pieces in Imlay City). Let me know, I'm always looking for other Fbody guys in the area.
I think we should start organizing some serious meets. What do you think?
Originally Posted by silent102
Ya, I might bring the LS1 down there I have been out and cruising around South Lyon lately. Not much cops and some nice roads. It is going to rain all weekend I hear?
Ya, nice meeting you too man, too bad I had to leave before everybody showed up. I sold my SHO today though so I’m thinking on going with a few mod's. Going to get a stall, headers and 125 shot im thinking. We ended up racing a stock or so he said c5 corvette on the highway on the way back and lost by like 7 lengths and ran into a 2007 Mustang GT with headers and some **** and managed to beat him by half a car. I wanted to run without the kids in the back but oh well. Cya later
Hey guys, I am around the Flint area as well. Shoot me some PMs about meeting up somewhere. I unfortunately don't have my car out yet, but it will be soon enough. I am guessing middle April.... 
.... we'll see.
Talk to you guys later,
James
.... we'll see.Talk to you guys later,
James