Corn Pickers from NE step inside!!!
Lmfao.... I just thought maybee someone needed some rims for cheap... I left so a little late now... and for the tuning I can do it on the cheap but I didn't have time to pull my wideband... if someone needs gear change, rev limiter, shift points, dtcs, or any of that done I can do it really cheap! I have unlimited 3rd gen pickups/cars and some credits to burn.... figured I could help you guys out if you need it!
If it takes being a post ***** to hook some of my fellow fbody friends out so be it! Just pm me if your interested on need a quick change on your tune let me know ill get it done on the cheap...
If it takes being a post ***** to hook some of my fellow fbody friends out so be it! Just pm me if your interested on need a quick change on your tune let me know ill get it done on the cheap...
Teching In
Joined: Nov 2009
Posts: 2
Likes: 0
From: North Platte
Now if only you were coming towards my direction.....then I would be jumping up and down saying "me me me" cause the T/A could use a tune. Will be taking it to Dan probably in April or May (most likely May since i'm up that way for a whole week then)
ya you would be closer to my house (alliance) than your are to Norfolk lol...
Camaro Spectre - I have HPT Pro and Lm-1 wideband here in kearney if you need a hand. Youd probly have to pay for the credits is all. Im NO Dan and cant show you RWHP/RWTQ but could get your setup pretty close.
Teching In
Joined: Nov 2009
Posts: 2
Likes: 0
From: North Platte
That would be awesome! Numbers don't matter its how it runs that counts. Especially since Kearney is a nothing drive.
Teching In
Joined: Nov 2009
Posts: 2
Likes: 0
From: North Platte
I can most surely do that as I have a pretty set schedule that never changes unless I take a vaca or sick (
) day. Going to put some more mileage on it however before I give you hollar. Have only 25-30 miles on the entire setup thanks to our lovely varying weather.
) day. Going to put some more mileage on it however before I give you hollar. Have only 25-30 miles on the entire setup thanks to our lovely varying weather. I can most surely do that as I have a pretty set schedule that never changes unless I take a vaca or sick () day. Going to put some more mileage on it however before I give you hollar. Have only 25-30 miles on the entire setup thanks to our lovely varying weather.
) day. Going to put some more mileage on it however before I give you hollar. Have only 25-30 miles on the entire setup thanks to our lovely varying weather.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Teching In
Joined: Mar 2010
Posts: 2
Likes: 0
From: texas
hey im in texas now but ill be back in omaha i have a cammed c6 vette with every bolt on stay in touch when i get back in omaha ill be more then happy to help show up some ricers with u when i get back
Teching In
Joined: Jan 2010
Posts: 11
Likes: 0
From: Hayes Center, NE
My exhaust is missing this piece right now, so basically from my Y pipe to the over the axle part. Its the borla cat back and i love the exhaust,
any suggestions/advice on the best way to get this fixed. I was hoping to just be able to buy the piece from borla or find someone selling it on here. Any suggestions for a good exhaust shop? I live in southwest NE
any suggestions/advice on the best way to get this fixed. I was hoping to just be able to buy the piece from borla or find someone selling it on here. Any suggestions for a good exhaust shop? I live in southwest NE
Teching In
Joined: Jan 2010
Posts: 11
Likes: 0
From: Hayes Center, NE
ive tried asking a couple people who are selling borla systems on here if they would be willing to sell just that part but no one so far wants to break up the system, and i called borla and they said that it would cost $$$$$ cause they would have to do a special order
hell im sure you could go find some exhaust from a shop if you look around long enough and just have them make that piece for you for pretty cheap.
Little update for you guys, ive been working pretty diligently to get the car up and going again and the motor is running and good to go. I got the trans and shifter in last night. I have a shift cable and **** on the way, all I really have to do is mock up a torque arm mount, get a trans poly mount, get my driveshaft made and have my tuner come over to get the car to idle and be driveable.
Little update for you guys, ive been working pretty diligently to get the car up and going again and the motor is running and good to go. I got the trans and shifter in last night. I have a shift cable and **** on the way, all I really have to do is mock up a torque arm mount, get a trans poly mount, get my driveshaft made and have my tuner come over to get the car to idle and be driveable.
Teching In
Joined: Oct 2008
Posts: 22
Likes: 0
From: Lincoln Nebraska.
Well, what the hell, im from Nebraska as well. Little town called Wisner. Im always looking for places to go, cruises to show up to, car shows ect.
i dont have a camaro or an LS engine, but im debating on going with a 5.3 or 6.0 LS style engine for my next build in my 50 Chevy. So, im doin my reasearch and weighing my odds.
i dont have a camaro or an LS engine, but im debating on going with a 5.3 or 6.0 LS style engine for my next build in my 50 Chevy. So, im doin my reasearch and weighing my odds.
Teching In
Joined: Nov 2009
Posts: 2
Likes: 0
From: North Platte
Just wondering what all the Nebraska people will be doing this summer.
Anybody coming to Nebraskaland days in NP perhaps?
How many of you will be at Kearney Cruise? I will be up there for that weekend, not sure if I plan to partake in trying to make a pass down the strip but I plan on putting 2 cars on the show/shine (even if the T/A isn't the prettiest atm).
Anybody coming to Nebraskaland days in NP perhaps?
How many of you will be at Kearney Cruise? I will be up there for that weekend, not sure if I plan to partake in trying to make a pass down the strip but I plan on putting 2 cars on the show/shine (even if the T/A isn't the prettiest atm).
Dont forget guys there will be an LSx gathering July 24th in Fremont at the state lakes. A thread will be started here in the next cople weeks but i just wanted to put this out there. It will be a great time to sit around bs and meet new people. Then we will go for a cruise around Fremont. Spots will be reserved so if you want to stay the night your more that welcomed. It was basically a F-body gathering last year but this year it is open to all f-bodies, GTO's, Corvette and so on. Lets make this a bigger turn out this year.
Here are a couple shots from last year.
Here are a couple shots from last year.
Good food, some shade, lotsa nice rides new & old, & grudge match on the highway afterwards. Always hotter then hell out there on the side of the highway tho, so bring lots of water/drink.
Steak dinner downtown after the racin' too!
http://www.stpaulnebraska.com/Pages/...10Schedule.pdf