Corn Pickers from NE step inside!!!
03-19-2010, 02:49 PM
#1241
Restricted User
iTrader: (36)
Join Date: Sep 2008
Location: Alliance Nebraska
Posts: 1,268
Likes: 0
Received 0 Likes
on
0 Posts
Lmfao.... I just thought maybee someone needed some rims for cheap... I left so a little late now... and for the tuning I can do it on the cheap but I didn't have time to pull my wideband... if someone needs gear change, rev limiter, shift points, dtcs, or any of that done I can do it really cheap! I have unlimited 3rd gen pickups/cars and some credits to burn.... figured I could help you guys out if you need it!
If it takes being a post ***** to hook some of my fellow fbody friends out so be it! Just pm me if your interested on need a quick change on your tune let me know ill get it done on the cheap...
If it takes being a post ***** to hook some of my fellow fbody friends out so be it! Just pm me if your interested on need a quick change on your tune let me know ill get it done on the cheap...
03-19-2010, 07:36 PM
#1242
Teching In
Join Date: Nov 2009
Location: North Platte
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Now if only you were coming towards my direction.....then I would be jumping up and down saying "me me me" cause the T/A could use a tune. Will be taking it to Dan probably in April or May (most likely May since i'm up that way for a whole week then)
03-19-2010, 09:14 PM
#1244
10 Second Club
iTrader: (6)
Join Date: Aug 2006
Location: Kearney, NE
Posts: 643
Likes: 0
Received 0 Likes
on
0 Posts
Camaro Spectre - I have HPT Pro and Lm-1 wideband here in kearney if you need a hand. Youd probly have to pay for the credits is all. Im NO Dan and cant show you RWHP/RWTQ but could get your setup pretty close.
03-19-2010, 09:23 PM
#1245
Teching In
Join Date: Nov 2009
Location: North Platte
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
That would be awesome! Numbers don't matter its how it runs that counts. Especially since Kearney is a nothing drive.
03-20-2010, 07:26 AM
#1247
Teching In
Join Date: Nov 2009
Location: North Platte
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
I can most surely do that as I have a pretty set schedule that never changes unless I take a vaca or sick (
) day. Going to put some more mileage on it however before I give you hollar. Have only 25-30 miles on the entire setup thanks to our lovely varying weather.
) day. Going to put some more mileage on it however before I give you hollar. Have only 25-30 miles on the entire setup thanks to our lovely varying weather.
03-20-2010, 09:28 AM
#1248
Restricted User
iTrader: (36)
Join Date: Sep 2008
Location: Alliance Nebraska
Posts: 1,268
Likes: 0
Received 0 Likes
on
0 Posts
I can most surely do that as I have a pretty set schedule that never changes unless I take a vaca or sick () day. Going to put some more mileage on it however before I give you hollar. Have only 25-30 miles on the entire setup thanks to our lovely varying weather.
) day. Going to put some more mileage on it however before I give you hollar. Have only 25-30 miles on the entire setup thanks to our lovely varying weather.
03-20-2010, 09:03 PM
#1249
Teching In
Join Date: Mar 2010
Location: texas
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
hey im in texas now but ill be back in omaha i have a cammed c6 vette with every bolt on stay in touch when i get back in omaha ill be more then happy to help show up some ricers with u when i get back
03-30-2010, 10:24 PM
#1250
Teching In
Join Date: Jan 2010
Location: Hayes Center, NE
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
My exhaust is missing this piece right now, so basically from my Y pipe to the over the axle part. Its the borla cat back and i love the exhaust,
any suggestions/advice on the best way to get this fixed. I was hoping to just be able to buy the piece from borla or find someone selling it on here. Any suggestions for a good exhaust shop? I live in southwest NE
any suggestions/advice on the best way to get this fixed. I was hoping to just be able to buy the piece from borla or find someone selling it on here. Any suggestions for a good exhaust shop? I live in southwest NE
03-31-2010, 06:31 AM
#1251
TECH Enthusiast
Thread Starter
iTrader: (36)
Join Date: Jul 2007
Location: Omaha, NE
Posts: 660
Likes: 0
Received 0 Likes
on
0 Posts
I dont know a good exhaust shop by you but i would just look into buying some prebent exhaust close to what you have and see if that works. Just mix and match
03-31-2010, 01:58 PM
#1252
Teching In
Join Date: Jan 2010
Location: Hayes Center, NE
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
ive tried asking a couple people who are selling borla systems on here if they would be willing to sell just that part but no one so far wants to break up the system, and i called borla and they said that it would cost $$$$$ cause they would have to do a special order
04-01-2010, 01:10 PM
#1253
TECH Enthusiast
Thread Starter
iTrader: (36)
Join Date: Jul 2007
Location: Omaha, NE
Posts: 660
Likes: 0
Received 0 Likes
on
0 Posts
hell im sure you could go find some exhaust from a shop if you look around long enough and just have them make that piece for you for pretty cheap.
Little update for you guys, ive been working pretty diligently to get the car up and going again and the motor is running and good to go. I got the trans and shifter in last night. I have a shift cable and **** on the way, all I really have to do is mock up a torque arm mount, get a trans poly mount, get my driveshaft made and have my tuner come over to get the car to idle and be driveable.
Little update for you guys, ive been working pretty diligently to get the car up and going again and the motor is running and good to go. I got the trans and shifter in last night. I have a shift cable and **** on the way, all I really have to do is mock up a torque arm mount, get a trans poly mount, get my driveshaft made and have my tuner come over to get the car to idle and be driveable.
04-01-2010, 03:55 PM
#1255
Teching In
Join Date: Oct 2008
Location: Lincoln Nebraska.
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
Well, what the hell, im from Nebraska as well. Little town called Wisner. Im always looking for places to go, cruises to show up to, car shows ect.
i dont have a camaro or an LS engine, but im debating on going with a 5.3 or 6.0 LS style engine for my next build in my 50 Chevy. So, im doin my reasearch and weighing my odds.
i dont have a camaro or an LS engine, but im debating on going with a 5.3 or 6.0 LS style engine for my next build in my 50 Chevy. So, im doin my reasearch and weighing my odds.
06-03-2010, 04:03 PM
#1256
Teching In
Join Date: Nov 2009
Location: North Platte
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Just wondering what all the Nebraska people will be doing this summer.
Anybody coming to Nebraskaland days in NP perhaps?
How many of you will be at Kearney Cruise? I will be up there for that weekend, not sure if I plan to partake in trying to make a pass down the strip but I plan on putting 2 cars on the show/shine (even if the T/A isn't the prettiest atm).
Anybody coming to Nebraskaland days in NP perhaps?
How many of you will be at Kearney Cruise? I will be up there for that weekend, not sure if I plan to partake in trying to make a pass down the strip but I plan on putting 2 cars on the show/shine (even if the T/A isn't the prettiest atm).
06-04-2010, 04:48 PM
#1259
Dont forget guys there will be an LSx gathering July 24th in Fremont at the state lakes. A thread will be started here in the next cople weeks but i just wanted to put this out there. It will be a great time to sit around bs and meet new people. Then we will go for a cruise around Fremont. Spots will be reserved so if you want to stay the night your more that welcomed. It was basically a F-body gathering last year but this year it is open to all f-bodies, GTO's, Corvette and so on. Lets make this a bigger turn out this year.
Here are a couple shots from last year.
Here are a couple shots from last year.
06-04-2010, 05:21 PM
#1260
Good food, some shade, lotsa nice rides new & old, & grudge match on the highway afterwards. Always hotter then hell out there on the side of the highway tho, so bring lots of water/drink.
Steak dinner downtown after the racin' too!
http://www.stpaulnebraska.com/Pages/...10Schedule.pdf