Bloomington Area
#101
Teching In
Thread Starter
Join Date: Mar 2007
Location: NW Indiana
Posts: 34
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
yea this is way too much work. oil pan cracked while replacing gasket and no one has one. new rear main seal/rear cover seal, new centerforce dual friction, reconditioned flywheel, TA Perf. rear end cover, new tie rods, new hooker super comp headers (stainless), new denso iridium spark plugs, new front rotors and pads, putting the granatelli lower control arms back on, got to get an alignment and front tires rebalanced. and i got to fix that stupid powersteering leak.
#102
TECH Addict
iTrader: (39)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
yea this is way too much work. oil pan cracked while replacing gasket and no one has one. new rear main seal/rear cover seal, new centerforce dual friction, reconditioned flywheel, TA Perf. rear end cover, new tie rods, new hooker super comp headers (stainless), new denso iridium spark plugs, new front rotors and pads, putting the granatelli lower control arms back on, got to get an alignment and front tires rebalanced. and i got to fix that stupid powersteering leak.
damn you have been busy in the month we have been out so far...what is the rest of the of your exhaust set up?
#103
TECH Enthusiast
iTrader: (9)
Join Date: Jun 2006
Location: Indiana
Posts: 667
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Apperance mods are going good since that is all I got money for haha. I went 15% with the tint and then other little things I'll pm you some pics I took after I waxed her a couple weeks ago. Yeah pretty boring at home for me too.
#104
Teching In
Thread Starter
Join Date: Mar 2007
Location: NW Indiana
Posts: 34
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
rest of the setup is a 3" hooker Y pipe not sure on the catback, a ravin muffler and two slash cut tips. I got it all together now. I can chirp 4th gear.
#114
Teching In
Thread Starter
Join Date: Mar 2007
Location: NW Indiana
Posts: 34
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
yea didnt bring it down. hopefully, will get a break this semester to get it before the snow flies. just rollin the suzuki for now. u see a grey suzuki grand vitara with dealer plates thats me
#115
TECH Enthusiast
iTrader: (5)
Join Date: Jan 2006
Location: seymour indiana
Posts: 660
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
do you get alot of street racing that way?? i am about an hour from bloomington...i either drive south about 45 min or north about 45 min...so if bloomington is worth hitting up other than for partying and to see the hoosiers play let me know
#116
TECH Addict
iTrader: (39)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
um i dont think btown has a street racing scene at all, i dont do too much of that anyway unless i just roll up on something on the highway worth running. i wanted to try and get a cruise together here or something though. so far we only have two fbodies...mine and my roommates(greg_74) im sure he'll chime in later
#120
TECH Addict
iTrader: (39)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
i would definitely say alumni are included, i think we might have to start a thread for this and and see what kind of interest there is. i would guess that ORP would be the best place to go as it is pretty close to halfway in between...and with the INDY track event and the LSX Shootout so close Im not sure when we could actually do it...