Another Hall's deal!!!
#6761
#6762
will the stock clutch take that kind of abuse? what about the zo6 output shafts, i know they are micro polished and are stonger in 07, but 150 bump would put that car close 580-600 rwhp...thats zr1 territory? i agree on the lp pro lt those are the only ones i would do on a z06, it is hard to believe that the cam is a 100 by itself. How much cam experience do you have? No offense but throwing those numbers up, i want a cam that thumps and is very streetable. My custom cam in one of my vettes rocks but that guy knows his ****, or thinks he does
#6763
mr digital, the bottle is here in the office, i repete the bottle is here in the office, we talked on the corvette forum before...your that crazy sob trying to mate a vette with a rx7. You guys are nuts. i will fedex that bottle today or pm me with your cell and we can make better arrangments.
#6764
hells ya'. i love hittin the sand in a hummer or jeep. and as far as a deal on the nitro bottle yup, it is a killer deal. It was on a project car we did for speed televison . "project super ninja"...we auction off all the parts for charity after it was over, no one bought the bottle so digital offered a buck for it a few weeks ago...its all his now.He is the one who turned me on to this thread. It rocks
#6765
hells ya'. i love hittin the sand in a hummer or jeep. and as far as a deal on the nitro bottle yup, it is a killer deal. It was on a project car we did for speed televison . "project super ninja"...we auction off all the parts for charity after it was over, no one bought the bottle so digital offered a buck for it a few weeks ago...its all his now.He is the one who turned me on to this thread. It rocks
#6766
as long as the fields were not planted that would be ok. sand is softer but it gets everywhere and i feel is harder on the truck than dirt. hell off roadin' is fun as hell as long as you are with the right people.
#6767
TECH Junkie
iTrader: (2)
Join Date: Jan 2006
Location: Fort Wayne, IN
Posts: 3,776
Likes: 0
Received 0 Likes
on
0 Posts
will the stock clutch take that kind of abuse? what about the zo6 output shafts, i know they are micro polished and are stonger in 07, but 150 bump would put that car close 580-600 rwhp...thats zr1 territory? i agree on the lp pro lt those are the only ones i would do on a z06, it is hard to believe that the cam is a 100 by itself. How much cam experience do you have? No offense but throwing those numbers up, i want a cam that thumps and is very streetable. My custom cam in one of my vettes rocks but that guy knows his ****, or thinks he does
#6768
#6769
Just wondering does anybody have any extra in good condition or a set of new body trim pieces that go on the doors of a 98-02 camaro? I almost opted to not put them back on but I will eventually go back tot he mall so door ding protectors might be a good thing.
#6770
#6771
z06's you cannot get a auto.....they put the auto in to make the car more consistant and have a stronger tranny... also that is not a new z06 it is a 07. the description tells the whole story
#6772
Thanks beaver I was in a hurry going out on another delivery. I didn't think you could get an auto, I thought that was the whole point of the ZO6, but I understand when you have that kind of power. I was to assume that they swapped it in. I saw in the video that RPM built it. Thanks again, Ok I'm heading out again see you guys in a couple of hours.
#6774
12 Second Club
iTrader: (1)
Join Date: Apr 2007
Location: Ft. Wayne, IN
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
Naw man, I like my pickem up truck, just wanna make it go faster. The turbo 2.2 in it is gettin tired and I think I might just swap er out so quit trying to screw wit my hopes and dreams.
#6775
#6776
Thanks beaver I was in a hurry going out on another delivery. I didn't think you could get an auto, I thought that was the whole point of the ZO6, but I understand when you have that kind of power. I was to assume that they swapped it in. I saw in the video that RPM built it. Thanks again, Ok I'm heading out again see you guys in a couple of hours.
#6777
TECH Junkie
iTrader: (2)
Join Date: Jan 2006
Location: Fort Wayne, IN
Posts: 3,776
Likes: 0
Received 0 Likes
on
0 Posts
We need atleast 15*(LS3/7/92 head) of split in the cam, so if you want that area/range, 232/247 .590/.590 112. Have never used this pattern in a LS7, but I'm sure it would work.
#6779
ya but will it produce ground thumping hp/tq? 15* of overlap, what if the heads were all nice and ported and blocked any more lift? really push the breathing aspec here..
#6780
Ill go right now.....not joking, I will leave work and head to Kokomo right now...call me....its 12:23 pm on Wendesday....I have my phone on...got a pocket full or loot and want poontang....call me bitch....don't be cockteasing me....