Another Hall's deal!!!
TECH Addict
iTrader: (17)
I went through three Optima yellow tops in my Grand Prix. Bought one, got a new one under warranty (like 2 months in) and it failed too. Took it in for warranty and they refused to give me a new one. Bought a second yellow top, and it lasted about 9 months and took a ****.
Went and bought a red Duralast, and it was still in the car when I sold it 3 years later. I'm all for the possibility of a wiring issue, but then why did my 50 dollar Autozone battery outlive my 150 dollar Optima by 4-5x or more.
Optimas may last fine for some, but they aren't consistent at anything except their idiotic prices.
Went and bought a red Duralast, and it was still in the car when I sold it 3 years later. I'm all for the possibility of a wiring issue, but then why did my 50 dollar Autozone battery outlive my 150 dollar Optima by 4-5x or more.
Optimas may last fine for some, but they aren't consistent at anything except their idiotic prices.
11 Second Club
iTrader: (12)
Join Date: Nov 2005
Location: Fort Wayne, Indiana
Posts: 636
Likes: 0
Received 0 Likes
on
0 Posts
Why would you guys be missing a socket anyway? Are you assuming it was your shop or techs?
I was just making a funny joke because I know Bob gives deep deals and throws in free stuff sometimes when customers come to EPP
LS1TECH Sponsor
iTrader: (13)
Join Date: Mar 2005
Location: Indiana
Posts: 691
Likes: 0
Received 0 Likes
on
0 Posts
That and Blake told me what he had heard. All I know, it wasn't us. And I won't go any further so we can just get back to wasting time and not having this EPP vs the world bullshit.
TECH Regular
iTrader: (1)
Join Date: Aug 2007
Location: FT WAYNE INDIANA
Posts: 408
Likes: 0
Received 0 Likes
on
0 Posts
10 Second Club
iTrader: (4)
Join Date: Mar 2006
Location: Fort Wayne, IN
Posts: 608
Likes: 0
Received 0 Likes
on
0 Posts
TECH Fanatic
iTrader: (24)
Just spent the last 5 hours trying to get my Alkycontrol kit working. Something's dead in it I think; when I hook up power, the pump makes noise (and doesn't ever stop) but nothing comes out and the test buttons don't seem responsive.
Not Alkycontrol's fault, the guy I bought this from was apparently retarded. Now I have to tear this thing down and figure out what the F the issue is. Ugh.
Not Alkycontrol's fault, the guy I bought this from was apparently retarded. Now I have to tear this thing down and figure out what the F the issue is. Ugh.
TECH Junkie
iTrader: (2)
Join Date: Jan 2006
Location: Fort Wayne, IN
Posts: 3,776
Likes: 0
Received 0 Likes
on
0 Posts
Tune Schedule:
Saturday: "new tunes" Scott M., Daren F., Rob B. 1st to get 15min. look at)
9am Chase N.
10:30am Mike O.
12:00pm Adam W.
1:30pm Chad H.
3:00pm Nate M.
4:30pm Brayden R.
6:00 Mike V. (retune)
Sunday: "retunes" 9am Chris M.
10:30am Brad H.
Brett L. (trans tune)
Justin M. (trans tune)
Misc: other cars that need stuff done.
Any questions please call me or pm me.
Thanks, Joe
9am Chase N.
10:30am Mike O.
12:00pm Adam W.
1:30pm Chad H.
3:00pm Nate M.
4:30pm Brayden R.
6:00 Mike V. (retune)
Sunday: "retunes" 9am Chris M.
10:30am Brad H.
Brett L. (trans tune)
Justin M. (trans tune)
Misc: other cars that need stuff done.
Any questions please call me or pm me.
Thanks, Joe
TECH Fanatic
iTrader: (24)
3 years of Electrical Engineering at Purdue.
I know how to run a ground Jacob.
Looks to me like either a dead digital pot or failed relay in the control box, but since it's "factory sealed" and I want the factory to look at it, I'm just going to send it in and have them fix it up.
edit: I did get the pump going, it just wasn't priming itself. Now when I hook the system up, it streams water at ~150 psi out of the nozzle until I pull the fuse. Helpful, if I need to wash my car.
I know how to run a ground Jacob.
Looks to me like either a dead digital pot or failed relay in the control box, but since it's "factory sealed" and I want the factory to look at it, I'm just going to send it in and have them fix it up.
edit: I did get the pump going, it just wasn't priming itself. Now when I hook the system up, it streams water at ~150 psi out of the nozzle until I pull the fuse. Helpful, if I need to wash my car.
Teching In
iTrader: (1)
Join Date: Apr 2008
Location: Manureville
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
TECH Fanatic
iTrader: (24)
Yeah, the pump moves fluid, the problem is that my progressive controller is currently a 400 dollar on/off switch, with a fuse instead of a toggle. Plug in fuse, full power from pump, no control. I think something is hosed in the unit, not surprising, since the guy I bought it from (used, not Julio Don, he's a pimp) is a complete and utter ******* tool (Latin: Toolicus Maximus).
I'm hoping that Julio can take it back and service it, otherwise I guess I buy a new alky controller. Woo.
Lucas,
Do you know if any 8.8" gearset and diff work in the 8.8 IRS Explorer housing? Trying to put together a 31 spline posi setup with 3.55 gears for the RX7, and I already have a housing thanks to Nick.
Yes, Ford parts on my Chevy powered Mazda with Nissan seats. That's how I roll.
I'm hoping that Julio can take it back and service it, otherwise I guess I buy a new alky controller. Woo.
Lucas,
Do you know if any 8.8" gearset and diff work in the 8.8 IRS Explorer housing? Trying to put together a 31 spline posi setup with 3.55 gears for the RX7, and I already have a housing thanks to Nick.
Yes, Ford parts on my Chevy powered Mazda with Nissan seats. That's how I roll.
TECH Junkie
iTrader: (2)
Join Date: Jan 2006
Location: Fort Wayne, IN
Posts: 3,776
Likes: 0
Received 0 Likes
on
0 Posts
Yeah, the pump moves fluid, the problem is that my progressive controller is currently a 400 dollar on/off switch, with a fuse instead of a toggle. Plug in fuse, full power from pump, no control. I think something is hosed in the unit, not surprising, since the guy I bought it from (used, not Julio Don, he's a pimp) is a complete and utter ******* tool (Latin: Toolicus Maximus).
I'm hoping that Julio can take it back and service it, otherwise I guess I buy a new alky controller. Woo.
Lucas,
Do you know if any 8.8" gearset and diff work in the 8.8 IRS Explorer housing? Trying to put together a 31 spline posi setup with 3.55 gears for the RX7, and I already have a housing thanks to Nick.
Yes, Ford parts on my Chevy powered Mazda with Nissan seats. That's how I roll.
I'm hoping that Julio can take it back and service it, otherwise I guess I buy a new alky controller. Woo.
Lucas,
Do you know if any 8.8" gearset and diff work in the 8.8 IRS Explorer housing? Trying to put together a 31 spline posi setup with 3.55 gears for the RX7, and I already have a housing thanks to Nick.
Yes, Ford parts on my Chevy powered Mazda with Nissan seats. That's how I roll.
On The Tree
iTrader: (24)
Join Date: Nov 2008
Location: Ft. Wayne, IN
Posts: 191
Likes: 0
Received 0 Likes
on
0 Posts
Saturday: "new tunes" Scott M., Daren F., Rob B. 1st to get 15min. look at)
9am Chase N.
10:30am Mike O.
12:00pm Adam W.
1:30pm Chad H.
3:00pm Nate M.
4:30pm Brayden R.
6:00 Mike V. (retune)
Sunday: "retunes" 9am Chris M.
10:30am Brad H.
Brett L. (trans tune)
Justin M. (trans tune)
Misc: other cars that need stuff done.
Any questions please call me or pm me.
Thanks, Joe
9am Chase N.
10:30am Mike O.
12:00pm Adam W.
1:30pm Chad H.
3:00pm Nate M.
4:30pm Brayden R.
6:00 Mike V. (retune)
Sunday: "retunes" 9am Chris M.
10:30am Brad H.
Brett L. (trans tune)
Justin M. (trans tune)
Misc: other cars that need stuff done.
Any questions please call me or pm me.
Thanks, Joe