Collin AKA ROAD PIRATE I huge wheel stand vid!!!
Trending Topics
#12
TECH Regular
iTrader: (11)
Join Date: Mar 2002
Location: KANSAS CITY, MISSOURI
Posts: 433
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
small correction...the heads are untouched "SDPC cnc ported" L92 heads running stock valvetrain. It has a very mild camshaft and the combo was well thought out. It is a very reliable, very consistent combo that runs on pump gas and is driven 20 or so miles to and from the track on DR's.(He's even driven it in the snow..funny story about that) Mad props to Collin!
![Headbang](https://ls1tech.com/forums/images/smilies2/headbang.gif)
#14
TECH Senior Member
Thread Starter
iTrader: (10)
Join Date: May 2005
Location: Bossier city,LA barksdale AFB
Posts: 5,353
Likes: 0
Received 2 Likes
on
2 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
small correction...the heads are untouched "SDPC cnc ported" L92 heads running stock valvetrain. It has a very mild camshaft and the combo was well thought out. It is a very reliable, very consistent combo that runs on pump gas and is driven 20 or so miles to and from the track on DR's.(He's even driven it in the snow..funny story about that) Mad props to Collin!![Headbang](https://ls1tech.com/forums/images/smilies2/headbang.gif)
![Headbang](https://ls1tech.com/forums/images/smilies2/headbang.gif)
i was always told non ported guess i was told wrong.
![Chug! Chug! Chug!](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_chug.gif)
#16
11 Second Club
iTrader: (8)
Join Date: Mar 2007
Location: Lee's Summit MO
Posts: 178
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Try over 700 feet....![Grin](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_grin.gif)
He was able to watch the left wall the whole time it was airborne so he knew EXACTLY where he was at all times. I think the car set back down softer on that pass than it usually does on the "normal" wheelies it does. LMAO
![Grin](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_grin.gif)
![Hail](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_hail.gif)
#19
9 Second Club
iTrader: (5)
Join Date: Aug 2006
Location: Lee's Summit, MO
Posts: 350
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I made my own set of slap bars off the lower A-arm mounts, similar to Madmans yet much stronger and heavier. I made 94 passes so far this year and it has hit the slap bars hard probably 20 times. No damage yet.
You might be able to zoom in and highlight them in this pic "wlsmoku" took for me.
You might be able to zoom in and highlight them in this pic "wlsmoku" took for me.
![](https://i124.photobucket.com/albums/p14/wlsmoku/10-18-08collin.jpg)